Toshiba DKT3000/2000 manual To use the Call Forward button sequence, Point in the sequence

Advanced Operation

Call Forward

➤To use the Call Forward button sequence

➤Follow the instructions in the following table, shown under “Button Sequence.” Some features require additional input, such as:

•Destination – If the destination is an outside number, press ￿￿after entering the destination. The CTX accepts destination numbers of up to 32 digits.

•Timer – This is a two digit entry representing how long (eight to 160 seconds) your telephone should ring before forwarding the call. If you enter one digit, you must press ￿￿after entering the single digit.

•Pass Code – A four-digit code established by system programming to prevent unauthorized changes. The code applies to the station to be forwarded; not to the station entering the code.

Note In the following table, (Tone) means that a confirmation tone will play at that

	point in the sequence.
Table 2	Call Forward Procedure
Feature		Button Sequence

Call Forward Any Call - Internal and Incoming Line Calls:

Forwards any call, whether an internal call or incoming line call.

All Calls	Extension (Ext.) button + ￿￿￿￿￿(Tone) + Destination No. (Tone)
Busy	Ext. button +	(Tone) + Dest. No. (Tone)
No Answer	Ext. button +	(Tone) + Dest. No. (Tone) + Timer + ￿
Busy No Answer	Ext. button +	+ Dest. No. + Timer + ￿
Cancel	Ext. button +￿￿￿￿￿￿(Tone)
Call Forward - Incoming Line Calls:
Forward incoming line calls only.
All Calls	Ext. button +	(Tone) + Dest. No. (Tone)
Busy	Ext. button +	(Tone) + Dest. No. (Tone)
No Answer	Ext. button +	+ Dest. No. (Tone) + Timer (Tone) +
Busy No Answer	Ext. button +	+ Dest. No. (Tone) + Timer (Tone) + ￿
Cancel	Ext. button + ￿￿￿￿￿(Tone)

30 Strata CTX DKT3000/2000-Series Telephone 05/02