Advanced Operation
Speed Dial
Note Selected telephones may have the ability to change System Speed Dial numbers. Follow this procedure but specify a System Speed Dial number (200~999) instead.
3.Enter the destination digits, then press . The LCD shows “SPEED DIAL” + the Speed Dial Number + destination + #. You hear Success Tone.
4.Release the telephone. To enter another number, repeat the process, starting with Step 1.
CTX System Administration
The third method of storing station Speed Dial numbers is via your CTX System Administrator, who can establish your Station Speed Dial number through administrative software and associate a name with it. This name is used by the Directory Dialing feature of DKT3014 large display telephones.
Advanced Speed Dial Operation
Special Characters
Speed Dial Numbers may include ~, , and Pause. When using the Access Code input method (see above) it is also necessary to use to indicate you have finished entering the destination number. This creates 14 functions to be input from the 12 buttons on the dial pad.
Long Speed Dial Numbers
Speed Dial Numbers are stored sequentially in memory areas capable of holding 32 digits. If you exceed 32 digits, the excess are stored in the next higher area and consume the next sequential Speed Dial Number.
You can dial the entire string by entering the original Speed Dial Number and all digits will be sent, including those in excess of 32. If that were Speed Dial Number 100, Number 101 would no longer be available. You are not prevented from storing a new Number 101 but, if you do, Number 100 will be shortened to 32 digits.
Strata CTX | 49 |