Toshiba DKT3000 manual EU Compliance

Page 106

Notes to Users	EU Compliance

Any peripheral apparatus connected to the above ports must have the same EN60950 classification.

ie.

♦

♦

1-3.

1-4.

SELV ports must only be connected to SELV type ports. TNV ports must only be connected to TNV type ports.

The Strata CTX670 system must be hardwired into a switched fused spur, (which should comply with the requirements of a disconnecting device as specified in the standard EN60950), the switch on the fused spur outlet shall be considered the AC power disconnection device. This spur must be installed in accordance with 16th edition of the IEE wiring regulations, aka BS7671:1992. Or the latest edition of this standard.

The Strata CTX100 system must be hardwired into a switched fused spur, (which should comply with the requirements of a disconnecting device as specified in the standard EN60950), the switch on the fused spur outlet shall be considered the AC power disconnection device. This spur must be installed in accordance with 16th edition of the IEE wiring regulations, aka BS7671:1992. Or the latest edition of this standard

Environmental Installation details.

The Strata CT is designed to work within the following environmental conditions:

♦

♦

Operating temperature 0oC to 40oC Humidity 20% to 80%

Step 2: EU Compliance

Toshiba Information Systems (U.K.) Ltd declare that the Strata CTX100 & CTX670 complies with the EEC’s EMC directive, Directive No. 89/366/EEC as amended by directive 92/31/EEC. The product has been assessed and found to comply with the following generic standards:

♦

♦

EN55022:1998-9, EN/IEC61000-3-2/1995, EN/IEC61000-3-3/1995 (Emissions)

EN52024:1998, EN61000-4-2/1995+A1:1998, EN61000-4-3/1997+A1:1998 EN61000-4-4/1995+A1:2001, EN61000-4-5/1995+A1:2001, EN61000-4-6/1995+A1:2001, (Immunity)

Strata CTX DKT3000/2000-Series Digital Telephone October 2002

A-3

Image 106

Contents DKT3000/2000telephone DKT3000/2000-Series Digital Telephone User Guide Publication Information Copyright Telecoms DivisionContents Advanced Operation Iii DKT3014 LCD Features Appendix a Centrex Application Contents Introduction OrganisationConventions Description How to Use This GuideConventions Arial BoldRelated Documents/Media Related Documents/Media Grand Tour DKT3000-series TelephonesGrand Tour DKT3020-SD TelephoneLiquid Crystal Display Fixed ButtonsFlexible Buttons LCD Control ButtonsDKT2000/2500-series Telephones DKT2020-SD Telephone Line Buttons DKT3500 Terminal Overview DKT3512F-SDKT3524F-S Key DifferencesButton Assignments DKT3500-Series DKT3000-SeriesImportant Read First BasicsWhat’s My Line? Which Outgoing/Incoming Call Features Do I Have? Spkr Button Making a CallHot Dialling HandsetSpeaker Switching Between Handset and SpeakerphoneAnswering a Call Handsfree AnswerbackMessage Waiting Responding to a Lit Msg LEDMicrophone Turning On/Off Message Waiting LED on Another ExtensionTo transfer a call directly to Voice Mail VM Call TransferTo perform Call Transfer Immediate To transfer conference control Conference CallsTo conference calls To hold a conference callConnecting Two Outside Lines Adding Voice Mail to a ConferenceAutomatic Hold HoldExclusive Hold Consultation HoldTo adjust the handset volume Volume ControlLCD Contrast Adjustments To adjust handset Beep ToneLCD Contrast Adjustments Using Your LCD Advanced OperationSoft Keys Soft Key Example To clear the registered message Advisory MessagesTo set an advisory message Msg No Characters Displayed Additional DigitsVerified/Non-Verified Account Codes To dial using Forced Account CodesAccount Code Calls Forced Account CodesTo enter an Account Code using access codes To dial using the Account Code buttonVoluntary Account Codes Verified/Non-Verified Automatic Busy Redial To cancel Automatic Busy RedialTo activate Automatic Busy Redial Automatic Callback To cancel ACBTo set Automatic Callback To cancel background music on your telephone speaker To enable background music on your telephone speakerBackground Music Station Call ForwardSystem Call Forward CategoriesCall Forward Settings To change your Pass Code Station Call Forward ProceduresTo use the Call Forward button sequence Call Forward Any Call Set for Another Station Call Forward Incoming Line CallsCall Forward Incoming Line Call Set for Another Station To view Call History Call HistoryCall Forward System Call Park Orbits To park a call Call PickupGroup Pickup To retrieve a parked callTo perform Call Pickup Call PickupFor Calls On Hold Dialling Description Call Waiting To answer a waiting call by placing the current call on holdDirect Station Selection Buttons Hotline Direct Inward System Access DisaTo connect directly to another station’s extension Distinctive Ringing Do Not DisturbSetting DND for Another Extension Door Locks To unlock a doorDoor Phones To answer a door phone callTo call/monitor a door phone Emergency RingdownLanguage Codes To call from a door phoneTo answer a Handset OCA call Off-hook Call AnnounceTo make an OCA call To answer a Speaker OCA callDo Not Disturb Override Override CallsBusy Override To use Busy OverrideExecutive Override Class of Service OverrideTo perform Class of Service Override To perform Executive OverrideAnswering a PagingPrivacy Override All CallTo make an All Call PrivacyEmergency To answer an All CallSpeed Dial To set/cancel PrivacyRedial To use Privacy ReleaseMaking a Call Using Speed Dial Storing a Station Speed Dial NumberAdvanced Speed Dial Operation To store a Station Speed Dial Number using an Access CodeCTX System Administration Special CharactersDial String Characters Tone/Pulse DiallingTo change Tone Dialling Entry MeaningVoice Mail Soft Keys Voice Mail Direct TransferStratagy ES Main Menu Soft Keys for CTX Digital Telephones Voice Mail Soft Keys DND Previous Call Recording To record a call Other Voice Mail FeaturesPause/Resume Recording Advanced Operation DKT3014 LCD Features DKT3014-SDL TelephoneDirectory and Speed Dial Listings Direct Station SelectionSystem Speed Dial and Personal Speed Dial Internal Directory and External DirectoryAlphanumeric Entry DKT3014 LCD Features DKT3014 LCD Features Programming Feature Buttons User ProgrammingUser Programming Mode Flexible Button CodesFlexible Button Codes Feature Setting/Changing a Flexible Button’s FunctionFeature Code One Touch Buttons Changing a One Touch ButtonTo Use a One Touch Button Setting/Changing a Personal Speed Dial CodeSpecial Characters Feature Codes Feature Access Codes Conferencing Three Way Feature Feature Access Code Sequences Messaging Advisory Volume Control Ringing Feature Access CodesFeature Feature Access Code Sequences Speed Dial Register + Index Number 300~399LED Indicator Details LED Indicator Details DADM/DSS Console DadmButtons and LEDs DSS Console FeaturesDSS Buttons Transferring to an Idle Station Calling a StationTo transfer a call to an idle station Speed Dial Call Transfer with Camp-onCall Answering Outside Line To transfer call to a busy stationNight Transfer Button PagingCall Forward Override DSS Override To override call forward with your DSS ConsoleCentrex Application Centrex Feature ButtonsFlexible Directory Numbering Delayed Ringing Ringing RepeatButton Labels Feature Button DefinitionsButton Definitions Button Labels Call and to place your station in the idle condition Button Labels Safety Approval Table A-1Safety Approval Table A-1 EU Compliance Equipment details Strata CTX100 Base Cabinet Dimensions Expansion Cabinet DimensionsEquipment details Strata CTX670 Type Approval Interface Type Network ServiceTable A-2 Network Planning Information Tones Frequency Cadence Meaning Signal toTable A-3 Table A-3 Table A-5 Table A-4System Port Type Index IN-1IN-2 IN-3 IN-4

Related manuals

Manual 104 pages 24.41 Kb