Speak@Ease
Users of the Speak@Ease softkey can place a call by speaking the name of the person they wish to dial. Speak@Ease enables you to have access to Mitel Networks Speech Server. The Speech Server is a speech recognition application that routes incoming calls to a specific destination based on spoken commands.
To dial a call using Speak@Ease:
1.Press the key you have programmed to Speak@Ease.
2.Speak the name of the person you wish to call.
Night Answer
The Night Answer feature allows you to route calls to an attendant or message at night.
To enable Night Answer:
zPress the key you programmed to Night Answer. When you have enabled Night Answer, this key is highlighted.
To disable Night Answer:
zPress the key you programmed to Night Answer
Trunk Flash
The Trunk Flash feature allows you to access Centrex features (if available) while you are talking on an outside call.
To flash a trunk while talking on an outside call:
1.Press the key you have programmed to Flash.
Note: You can program a key to single flash or double flash.
2.Wait for dial tone.
3.Dial the Centrex feature access code.