FLASH
This feature is used to activate customer calling services available through your local phone company, such as Call Waiting. These services generally require an extra monthly fee. If you subscribe to any of these services, please refer to the phone company’s instructions on how to use FLASH.
To answer an incoming call while having a conversation:
•After you hear the Call Waiting tone, press and release the FLASH button. The first call is placed on hold while the second call can be answered.
To return to your first call and put the second call on hold:
•Press and release FLASH again. The first call can continue while the second call is put on hold.
TO USE TEMPORARY TONE DIALING
If you have pulse service, you can temporarily change from pulse to tone service. After dialing the telephone number, press and release the * button on the telephone. This allows access to phone services that require a tone, such as banking and
TROUBLESHOOTING TIPS
NO DIAL TONE
•Check all cabling to make sure that all connections are secure and not damaged.
•Check hook switch: Does it fully extend when handset is lifted from cradle?
NO DISPLAY
•Replace batteries.
•Check for proper battery installation.
NO INFORMATION IS SHOWN
AFTER THE PHONE RINGS
•Did you order Caller ID service from your local telephone company? This unit requires that you subscribe to Caller ID service in order to work.
•Be sure to wait until the second ring before answering.
PB