5. Program your area code
(A) After selecting the language, the display flashes "ENTER AREA CODE" and “7
DIGITS DIAL”.
(B) If you dial your local calls using 7 digits (e.g., 555- 1212), then enter your local area code, press the Dial button, and go to Step C.
If you dial your local calls using 10 digits (e.g., 303-
(C) The display flashes “ENTER AREA CODE” and “10
DIGITS DIAL”.
Enter the area code(s) for numbers that you dial using ten digits (e.g.,
6. Press the Save button to save these operating settings.
After installation, lift the telephone's Handset and listen for the dial tone. If there is no dial tone, check to make sure all cords are firmly plugged into their jacks.
Note: Programming your area code will allow you to easily
dial numbers that are in your CALLER ID list. See the Section “Calling Back a Number from the CALLER ID List” for more information on dialing calls from your CALLER ID list.
Page 5