Gateway AG-168V user manual inner line prefix default is

Page 15

AG-168V SIP GATEWAY User Manual (V1.42)

ddd prefix: With enable or dialnum selected in use dialplan drop down list, set

long distance call prefix according to E.164 dial rule, such as 0.

inner line: Enable/disable innerline call by selecting corresponding items from dropdown list.

disable: Disable call innerline by selecting this item.

enable: enable call innerline by selecting this item.

omit prefix Enable , ingnore the number of the inner line prefix , cooperated

with special system

inner line prefix: default is 0.

nonlocal prefix: With enable selected in innerline dropdown list, please fill the number switching to long-distance call, such as 9.

Call waiting: Enable/disable call waiting by checking/unchecking the box.

Use digitmap: Enable/disable digit map by checking/unchecking the box.

forward number: Enter receiving forwarded calls GATEWAY number into this field; If the IP GATEWAY used with modem, with modem item selected in iptype list box, and then fill ISP number into this field.

fwd poweroff: Forward calls if power off by checking this box. Please enter

receiving forwarded calls GATEWAY number into fwd number field.

fwd noanswer: Forward calls without replying by checking this box. Please enter

receiving forwarded calls GATEWAY number into fwd number field.

fwd always: Forward all calls by checking this box. Please enter receiving

15

Image 15

Contents Function Keys of AG-168V SIP Gateway Introduction Features Software HardwareGateway supports following standard and protocol Standard and ProtocolOperating requirements Electric requirementsSize InstallationPhone Keypad setup ConfigurationConfigured by WEB Is192.169.1.100 Network SettingPage Protocol Setting Page Register port phone number set local IDPhone settings Page inner line prefix default is Audio settings G729g7231g711ug711a and gsm Other settingsPhonenumber check phonenumber auto upgrade Button to confirm the modification Configured by PalmToolTelnet Configuration AG-168V Telnet Commands ExplanationComman Set Detail description of AG-168V Telnet commands Command ?Command get GetInnerline 1enable Localprefix Detailed description Set iptype Command set Syntax description set keywords valueSet subnetmask Set pppidSet ppppin Set ipSet dns Set serviceSet service type Set routerSet nataddr Set serviceaddrSet serviceid Set nattraversalSet account Set signalportSet natttl Set GATEWAYnumberSet jittersize Set registerttlSet rtptos Set rtpportSet dddcode Set dtmf payloadSet dialplan Set dialnumberSet localpreifx Set iddprefixSet dddprefix Set innerlineSet fwdalways Set fwdpoweroffSet digitmap Set fwdnumberSet aec Set 6.3kSet vad Set agcSet codec3 Set passwordSet superpassword Set codec2Relevant Usage load Command exit Set upgradeaddrCommand store Relevant Usage store Command loadCommand ping Syntax description ping IP address Ftp command Syntax description ftp valueRelevant usage ftp Call with ip address Usage of AG-168V FXSCall when Pstn first Dual mode enabled Prepare Updated program through FTP Upgrade AG-168V IP GatewayTelnet command to updating Using HttpHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved