connecting with the GATEWAY or at the same segment of the GATEWAY, double click
icon to
open the PalmTool. The index page of PalmTool will popup.
a)Input the IP address of the GATEWAY into Local IP field (such as 192.168.1.100), and then click “GATEWAY Settings” button.
From Version1.24, use PalmTool to set the IP GATEWAY, please set debug as output or output all firstly, or PalmTool cannot connect IP GATEWAY. The parameters of PalmTool is same as the parameters in HTTP, so please refer to HTTP set chapter to learn how to set
IP GATEWAY.
Telnet Configuration
On the PC choose Start>Run, and then type telnet 192.168.1.100 into Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the DOS window. Then the following information will be displayed.
AG-168V V1.39 settings
Password :
Then please type password. With debug is set as 0[disable], if type ordinary password (default one is 1234), after Retun, you will see
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP GATEWAY is under setting mode, and then you can set the
AG-168V Telnet Commands Explanation
Comman | Function |
d |
|
? | Supply command name and parameters |
20