Gateway AG-168V Set 6.3k, Set vad, Set agc, Set aec, Set handsetin, Set speakerin, Set handsetout

Page 32

AG-168V SIP GATEWAY User Manual (V1.42)

Set audio frames in RTP package. X is Arabic numerals between 0 and 7.

set 6.3k X

With G.7231, set AG-168V IP GATEWAY to use 6.3K rate or not. X is

ranged from 0 through 1: 0: use 6.3K rate; 1: use 5.3K rate.

set vad X

Enable/disable VAD. X is ranged from 0 through 1: 0: disable VAD; 1: enable

VAD.

set agc X

Enable/disable AGC. X is ranged from 0 through 1: 0: disable AGC; 1: enable

AGC.

set aec X

Enable/disable AEC. X is ranged from 0 through 1: 0: disable AEC; 1: disable

AEC.

set handsetin X

Set initial volume of handset. X is ranged from 0 through 15.

set speakerin X

Set initial volume of microGATEWAY of the base. X is ranged from 0 through

15.

set handsetout X

Set initial volume of handout. X is ranged from 0 through 31.

set codec1 X

Set the priority 1of the audio compression algorithm. X is range from 0

32

Image 32

Contents Function Keys of AG-168V SIP Gateway Introduction Features Hardware SoftwareStandard and Protocol Operating requirementsElectric requirements Gateway supports following standard and protocolInstallation SizeConfiguration Phone Keypad setupConfigured by WEB Network Setting Is192.169.1.100Page Protocol Setting Page phone number set local ID Register portPhone settings Page inner line prefix default is Audio settings Other settings G729g7231g711ug711a and gsmPhonenumber check phonenumber auto upgrade Configured by PalmTool Button to confirm the modificationComman Telnet ConfigurationAG-168V Telnet Commands Explanation Detail description of AG-168V Telnet commands Command ? Command getGet SetInnerline 1enable Localprefix Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service Set service typeSet router Set dnsSet serviceaddr Set serviceidSet nattraversal Set nataddrSet signalport Set natttlSet GATEWAYnumber Set accountSet registerttl Set rtptosSet rtpport Set jittersizeSet dtmf payload Set dialplanSet dialnumber Set dddcodeSet iddprefix Set dddprefixSet innerline Set localpreifxSet fwdpoweroff Set digitmapSet fwdnumber Set fwdalwaysSet 6.3k Set vadSet agc Set aecSet password Set superpasswordSet codec2 Set codec3Set upgradeaddr Command storeRelevant Usage store Command load Relevant Usage load Command exitRelevant usage ftp Command ping Syntax description ping IP addressFtp command Syntax description ftp value Usage of AG-168V FXS Call with ip addressCall when Pstn first Dual mode enabled Upgrade AG-168V IP Gateway Telnet command to updatingUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved