Gateway AG-168V user manual All rights reserved

Page 41

AG-168V SIP GATEWAY User Manual (V1.42)

and there are no new features of use to them in our 1.35 and 1.36 versions, then they don’t need to put these files on FTP server. The customers will continue to use version

1.34.However if we have some useful features in 1.37, then by uploading the new files to the FTP server all customers will be upgraded at their next system reboot.

4.We also support manual FTP upgrades via the keypad on phones. If the service provider decides to use this feature, the following files also need to be uploaded:

HardwareTag.bin

firmware binary

HardwareTag.dat

phone settings

HardwareTag.txt

digit map

Here HardwareTag is phone’s hardware type, as in item 2 above.

A manual firmware upgrade is performed by picking up the phone and pressing

Phone Password (default: 1234) + n + LocalIP_Key

If n = 5, the phone settings are upgraded

If n = 6, the digit map is upgraded

If n = 8, the firmware is upgraded

Reserves the right to make changes in technical and product

specification without prior notice.

AG-168V SIP GATEWAY User Manual (V1.42)

All rights reserved

41

Image 41
Contents Function Keys of AG-168V SIP Gateway Introduction Features Software HardwareOperating requirements Standard and ProtocolElectric requirements Gateway supports following standard and protocolSize InstallationPhone Keypad setup ConfigurationConfigured by WEB Is192.169.1.100 Network SettingPage Protocol Setting Page Register port  phone number set local IDPhone settings Page  inner line prefix default is Audio settings G729g7231g711ug711a and gsm Other settingsPhonenumber check phonenumber auto upgrade Button to confirm the modification Configured by PalmToolComman Telnet ConfigurationAG-168V Telnet Commands Explanation Command get Detail description of AG-168V Telnet commands Command ?Get SetInnerline 1enable Localprefix Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet router Set dnsSet serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet GATEWAYnumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dialplan Set dtmf payloadSet dialnumber Set dddcodeSet dddprefix Set iddprefixSet innerline Set localpreifxSet digitmap Set fwdpoweroffSet fwdnumber Set fwdalwaysSet vad Set 6.3kSet agc Set aecSet superpassword Set passwordSet codec2 Set codec3Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitRelevant usage ftp Command ping Syntax description ping IP addressFtp command Syntax description ftp value  Call with ip address Usage of AG-168V FXSCall when Pstn first Dual mode enabled Telnet command to updating Upgrade AG-168V IP GatewayUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved