Gateway AG-168V user manual Network Setting, Is192.169.1.100

Page 8

AG-168V SIP GATEWAY User Manual (V1.42)

Fig 3.1 Http Setting

Network Setting

Fig 3.2 Network Setting

iptype: Set how IP GATEWAY gets relevant network parameters by selecting

corresponding item from drop down list.

static ip: Select this item to authorize users set IP address, subnet mask and

router IP address of IP GATEWAY manually.

dhcp: Select this item to enable DHCP mode. With this system, your LAN or router

automatically assigns all the required network parameters to any device connected

to it when the device log on. AG-168V IP GATEWAY is shipped from the factory

with DHCP on. So, if you’re LAN or router is configured to use DHCP addressing,

the IP GATEWAY’s LAN parameters will automatically be configured as soon as it is

connected to the LAN or router and powered up.Default IP address of the AG-168V

is192.169.1.100.

pppoeThose ADSL and Cable Modem users please select this item for it is a

protocol especially designed for them. With this system, ADSL ISP automatically

assigns all the required IP parameters to any device connected to it when the

device log on.

modemIf the IP GATEWAY used with modem, please select this item to get

8

Image 8

Contents Function Keys of AG-168V SIP Gateway Introduction Features Hardware SoftwareStandard and Protocol Operating requirementsElectric requirements Gateway supports following standard and protocolInstallation SizeConfiguration Phone Keypad setupConfigured by WEB Network Setting Is192.169.1.100Page Protocol Setting Page phone number set local ID Register portPhone settings Page inner line prefix default is Audio settings Other settings G729g7231g711ug711a and gsmPhonenumber check phonenumber auto upgrade Configured by PalmTool Button to confirm the modificationComman Telnet ConfigurationAG-168V Telnet Commands Explanation Detail description of AG-168V Telnet commands Command ? Command getGet SetInnerline 1enable Localprefix Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service Set service typeSet router Set dnsSet serviceaddr Set serviceidSet nattraversal Set nataddrSet signalport Set natttlSet GATEWAYnumber Set accountSet registerttl Set rtptosSet rtpport Set jittersizeSet dtmf payload Set dialplanSet dialnumber Set dddcodeSet iddprefix Set dddprefixSet innerline Set localpreifxSet fwdpoweroff Set digitmapSet fwdnumber Set fwdalwaysSet 6.3k Set vadSet agc Set aecSet password Set superpasswordSet codec2 Set codec3Set upgradeaddr Command storeRelevant Usage store Command load Relevant Usage load Command exitRelevant usage ftp Command ping Syntax description ping IP addressFtp command Syntax description ftp value Usage of AG-168V FXS Call with ip addressCall when Pstn first Dual mode enabled Upgrade AG-168V IP Gateway Telnet command to updatingUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved