Gateway AG-168V user manual Phonenumber check phonenumber auto upgrade

Page 18

AG-168V SIP GATEWAY User Manual (V1.42)

Phonenumber: check phonenumber auto upgrade.

upgrade addr: Put IP address or domain name obtained by ISP of FTP server

supplying upgrade program into this field.

nts ip: Fill IP address of time server here.

use daylight: Enable/disable daylight.

timezone: Select correct time zone in list box.

When debug set as 0[disable], if input ordinary password (default one is 1234), then following page

will pop up after clicking . And only those parameters can be modified.

Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable]

Update: Click this button to save the configuration and the GATEWAY will reboot. Once the GATEWAY reboots successfully, the new configuration is effective.

Note After entering set page, if Update button is not clicked within 5 seconds, then when you click it again, the index page asking for pin will pop up again. Then please input the password again to enter the set page and then click Update

18

Image 18

Contents Function Keys of AG-168V SIP Gateway Introduction Features Hardware SoftwareElectric requirements Standard and ProtocolOperating requirements Gateway supports following standard and protocolInstallation SizeConfiguration Phone Keypad setupConfigured by WEB Network Setting Is192.169.1.100Page Protocol Setting Page phone number set local ID Register portPhone settings Page inner line prefix default is Audio settings Other settings G729g7231g711ug711a and gsmPhonenumber check phonenumber auto upgrade Configured by PalmTool Button to confirm the modificationTelnet Configuration AG-168V Telnet Commands ExplanationComman Get Detail description of AG-168V Telnet commands Command ?Command get SetInnerline 1enable Localprefix Command set Syntax description set keywords value Detailed description Set iptypeSet ip Set pppidSet ppppin Set subnetmaskSet router Set serviceSet service type Set dnsSet nattraversal Set serviceaddrSet serviceid Set nataddrSet GATEWAYnumber Set signalportSet natttl Set accountSet rtpport Set registerttlSet rtptos Set jittersizeSet dialnumber Set dtmf payloadSet dialplan Set dddcodeSet innerline Set iddprefixSet dddprefix Set localpreifxSet fwdnumber Set fwdpoweroffSet digitmap Set fwdalwaysSet agc Set 6.3kSet vad Set aecSet codec2 Set passwordSet superpassword Set codec3Relevant Usage store Command load Set upgradeaddrCommand store Relevant Usage load Command exitCommand ping Syntax description ping IP address Ftp command Syntax description ftp valueRelevant usage ftp Usage of AG-168V FXS Call with ip addressCall when Pstn first Dual mode enabled Using Http Upgrade AG-168V IP GatewayTelnet command to updating Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved