Gateway AG-168V user manual

Page 9

AG-168V SIP GATEWAY User Manual (V1.42)

relevant network parameters auto. Then please fill ID and pin into ppp id and

ppppin fields.

ppp id: With pppoe or modem selected in iptype drop down list, please enter the

user name here.

ppp pin: With pppoe or modem selected in iptype drop down list, please enter the

password here.

local ip: With static ip selected in iptype drop down list, please enter IP address of IP GATEWAY here.

subnet mask: With static ip selected in iptype drop down list, please enter subnet mask of IP GATEWAY here.

router ip: With static ip selected in iptype drop down list, please enter router IP address of IP GATEWAY here.

dns: With static ip selected in iptype drop down list, please enter IP address of DNS server here.

dns 2: With static ip selected in iptype drop down list, please enter IP address of

backup DNS server here.

mac: MAC address is the physical

AG-168V GATEWAY is shipped from

address supplied by the Ethernet NIC.

the factory with a unique algorism MAC

address printed on the back of the base.

9

Image 9

Contents Function Keys of AG-168V SIP Gateway Introduction Features Software HardwareOperating requirements Standard and ProtocolElectric requirements Gateway supports following standard and protocolSize InstallationPhone Keypad setup ConfigurationConfigured by WEB Is192.169.1.100 Network SettingPage Protocol Setting Page Register port phone number set local IDPhone settings Page inner line prefix default is Audio settings G729g7231g711ug711a and gsm Other settingsPhonenumber check phonenumber auto upgrade Button to confirm the modification Configured by PalmToolTelnet Configuration AG-168V Telnet Commands ExplanationComman Command get Detail description of AG-168V Telnet commands Command ?Get SetInnerline 1enable Localprefix Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet router Set dnsSet serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet GATEWAYnumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dialplan Set dtmf payloadSet dialnumber Set dddcodeSet dddprefix Set iddprefixSet innerline Set localpreifxSet digitmap Set fwdpoweroffSet fwdnumber Set fwdalwaysSet vad Set 6.3kSet agc Set aecSet superpassword Set passwordSet codec2 Set codec3Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitCommand ping Syntax description ping IP address Ftp command Syntax description ftp valueRelevant usage ftp Call with ip address Usage of AG-168V FXSCall when Pstn first Dual mode enabled Telnet command to updating Upgrade AG-168V IP GatewayUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved