Gateway user manual Upgrade AG-168V IP Gateway, Telnet command to updating, Using Http

Page 38

AG-168V SIP GATEWAY User Manual (V1.42)

Upgrade AG-168V IP GATEWAY

Telnet command to updating

Using telnet , connecting AG-168V FXS, input SuperPassword when registered. Input ftp X command to update, the value range is 0-2 . detailed meaning is :

x-0 connecting to FTP server, getting the file to updating , and save in the sdram of the phone. Read from palmtool in order to debug.

x-1 connecting to FTP server, getting the file to updating and refresh the firmware x-2 connecting to FTP server , getting the file for the dial rule and refresh.

Using HTTP

Using HTTP, connecting AG-168V FXS gateway , input SuperPassword when

registered.
Press	,	promt the page. Detailed operation refer to
“updating and dial rule chaptor”	of	“configuration through webpage”

updating through Palmtool

Download the palmtool from www.atcom.com.cn, run the tool and set the ip address on

“IP ADDRESS ” , press the button of “phone settings” , change the “debug” to be “no

check” and save. After rebooting , press the button of “updating ” to get the newest

firmware to updating.

Prepare Updated program through FTP

You can ask the server provider for the latest version of program.

Operation

1.The service provider must have an FTP server. This server should allow anonymous

38

Image 38

Contents Function Keys of AG-168V SIP Gateway Introduction Features Hardware SoftwareElectric requirements Standard and ProtocolOperating requirements Gateway supports following standard and protocolInstallation SizeConfiguration Phone Keypad setupConfigured by WEB Network Setting Is192.169.1.100Page Protocol Setting Page phone number set local ID Register portPhone settings Page inner line prefix default is Audio settings Other settings G729g7231g711ug711a and gsmPhonenumber check phonenumber auto upgrade Configured by PalmTool Button to confirm the modificationComman Telnet ConfigurationAG-168V Telnet Commands Explanation Get Detail description of AG-168V Telnet commands Command ?Command get SetInnerline 1enable Localprefix Command set Syntax description set keywords value Detailed description Set iptypeSet ip Set pppidSet ppppin Set subnetmaskSet router Set serviceSet service type Set dnsSet nattraversal Set serviceaddrSet serviceid Set nataddrSet GATEWAYnumber Set signalportSet natttl Set accountSet rtpport Set registerttlSet rtptos Set jittersizeSet dialnumber Set dtmf payloadSet dialplan Set dddcodeSet innerline Set iddprefixSet dddprefix Set localpreifxSet fwdnumber Set fwdpoweroffSet digitmap Set fwdalwaysSet agc Set 6.3kSet vad Set aecSet codec2 Set passwordSet superpassword Set codec3Relevant Usage store Command load Set upgradeaddrCommand store Relevant Usage load Command exitRelevant usage ftp Command ping Syntax description ping IP addressFtp command Syntax description ftp value Usage of AG-168V FXS Call with ip addressCall when Pstn first Dual mode enabled Using Http Upgrade AG-168V IP GatewayTelnet command to updating Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved