Gateway AG-168V user manual Other settings, G729g7231g711ug711a and gsm

Page 17

AG-168V SIP GATEWAY User Manual (V1.42)

g729g7231g711ug711a and gsm.

codec3: Set the priority 3of the audio compression algorithm. The options are g729g7231g711ug711a and gsm.

codec4: Set the priority 4of the audio compression algorithm. The options are g729g7231g711ug711a and gsm.

codec5: Set the priority 5of the audio compression algorithm. The options are g729g7231g711ug711a and gsm.

g.723.1 high rate: enable/disable g.723.1 high rate. G.723.1 high rate is 6.3kbps,

low rate is 5.3kbps.

Other settings:

Fig 3.6 Other Setting

password: Set the password of the GATEWAY. (Default password is 1234).

Upgrade type: user FTP upgrade

disable: Disable output the debug message by selecting this item.

all: check hard type upgrade.

mac: check mac address auto upgrade.

Ppp id: check pppid auto upgrade.

account: check account auto upgrade.

17

Image 17

Contents Function Keys of AG-168V SIP Gateway Introduction Features Software HardwareOperating requirements Standard and ProtocolElectric requirements Gateway supports following standard and protocolSize InstallationPhone Keypad setup ConfigurationConfigured by WEB Is192.169.1.100 Network SettingPage Protocol Setting Page Register port phone number set local IDPhone settings Page inner line prefix default is Audio settings G729g7231g711ug711a and gsm Other settingsPhonenumber check phonenumber auto upgrade Button to confirm the modification Configured by PalmToolComman Telnet ConfigurationAG-168V Telnet Commands Explanation Command get Detail description of AG-168V Telnet commands Command ?Get SetInnerline 1enable Localprefix Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet router Set dnsSet serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet GATEWAYnumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dialplan Set dtmf payloadSet dialnumber Set dddcodeSet dddprefix Set iddprefixSet innerline Set localpreifxSet digitmap Set fwdpoweroffSet fwdnumber Set fwdalwaysSet vad Set 6.3kSet agc Set aecSet superpassword Set passwordSet codec2 Set codec3Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitRelevant usage ftp Command ping Syntax description ping IP addressFtp command Syntax description ftp value Call with ip address Usage of AG-168V FXSCall when Pstn first Dual mode enabled Telnet command to updating Upgrade AG-168V IP GatewayUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved