Gateway AG-168V user manual Audio settings

Page 16

AG-168V SIP GATEWAY User Manual (V1.42)

forwarded calls GATEWAY number into fwd number field.

fwd busy: Forward calls if busy by checking this box. Please enter receiving

forwarded calls GATEWAY number into fwd number field.

answer: Enter a number from 0 through 60 to set the entries of the seconds before the GATEWAY answer the call auto or forward the calls.

handset in: Drag the slider to adjust the volume of handset input. Drag it to the left to reduce the volume; while drag it to the right to increase the volume.

handset out: Drag the slider to adjust the volume of handset output. Drag it to the left to reduce the volume; while drag it to the right to increase the volume.

Dual modeset AG-168V FXS PSTN port

disable AG-168V FXS Not user PSTN

PSTN firstset AG-168V FXS first user PSTN call

IP firstset AG-168V FXS first user ip call

dual mode prefixset dual mode prefix IP firstset PSTN prefix

Audio settings:

Fig 3.5 Audio Setting

vad: Enable/disable VAD (voice activity detection).

agc: Enable/disable AGC.

aec: Enable/disable VEC.

codec1: Set the priority 1of the audio compression algorithm. The options are g729g7231g711ug711a and gsm.

codec2: Set the priority 2of the audio compression algorithm. The options are

16

Image 16

Contents Function Keys of AG-168V SIP Gateway Introduction Features Hardware SoftwareStandard and Protocol Operating requirementsElectric requirements Gateway supports following standard and protocolInstallation SizeConfiguration Phone Keypad setupConfigured by WEB Network Setting Is192.169.1.100Page Protocol Setting Page phone number set local ID Register portPhone settings Page inner line prefix default is Audio settings Other settings G729g7231g711ug711a and gsmPhonenumber check phonenumber auto upgrade Configured by PalmTool Button to confirm the modificationAG-168V Telnet Commands Explanation Telnet ConfigurationComman Detail description of AG-168V Telnet commands Command ? Command getGet SetInnerline 1enable Localprefix Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service Set service typeSet router Set dnsSet serviceaddr Set serviceidSet nattraversal Set nataddrSet signalport Set natttlSet GATEWAYnumber Set accountSet registerttl Set rtptosSet rtpport Set jittersizeSet dtmf payload Set dialplanSet dialnumber Set dddcodeSet iddprefix Set dddprefixSet innerline Set localpreifxSet fwdpoweroff Set digitmapSet fwdnumber Set fwdalwaysSet 6.3k Set vadSet agc Set aecSet password Set superpasswordSet codec2 Set codec3Set upgradeaddr Command storeRelevant Usage store Command load Relevant Usage load Command exitFtp command Syntax description ftp value Command ping Syntax description ping IP addressRelevant usage ftp Usage of AG-168V FXS Call with ip addressCall when Pstn first Dual mode enabled Upgrade AG-168V IP Gateway Telnet command to updatingUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved