Gateway AG-168V user manual Set router, Set dns2, Set mac, Set service type

Page 25

AG-168V SIP GATEWAY User Manual (V1.42)

With iptype set as 0, use this command to set subnet mask of AG-168V IP

GATEWAY.

set router XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set router IP of network with

AG-168V IP GATEWAY.

set dns XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set IP address of DNS server.

set dns2 XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set IP of backup DNS server.

set mac XX-XX-XX-XX-XX-XX

Set MAC address of the AG-168V IP GATEWAY. Parameter

xx-xx-xx-xx-xx-xx must be an HEX number.

set service X

Set register the gatekeeper or not. X ranged from 0 through 1. 0: do not

register; 1: register.

set service type X

Enable/disable the repaid and service system .choose the repaid server

provider. Parameter x ranged from 0 through 29:

0:common: disable repaid card; 4: use Mediaring service; 2: use eTalk card;

3:use Auvtech system; 5: use Ringtec service; 6: use Smartcon service; 7:

use dda service; 8: use vida service; 9: use citron system; 10: use asiasoft

system; 12: use zte system; 13: use huawei system; 16: use asiainfo system;

25

Image 25
Contents Function Keys of AG-168V SIP Gateway Introduction Features Software HardwareOperating requirements Standard and ProtocolElectric requirements Gateway supports following standard and protocolSize InstallationPhone Keypad setup ConfigurationConfigured by WEB Is192.169.1.100 Network SettingPage Protocol Setting Page Register port  phone number set local IDPhone settings Page  inner line prefix default is Audio settings G729g7231g711ug711a and gsm Other settingsPhonenumber check phonenumber auto upgrade Button to confirm the modification Configured by PalmToolAG-168V Telnet Commands Explanation Telnet ConfigurationComman Command get Detail description of AG-168V Telnet commands Command ?Get SetInnerline 1enable Localprefix Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set serviceSet router Set dnsSet serviceid Set serviceaddrSet nattraversal Set nataddrSet natttl Set signalportSet GATEWAYnumber Set accountSet rtptos Set registerttlSet rtpport Set jittersizeSet dialplan Set dtmf payloadSet dialnumber Set dddcodeSet dddprefix Set iddprefixSet innerline Set localpreifxSet digitmap Set fwdpoweroffSet fwdnumber Set fwdalwaysSet vad Set 6.3kSet agc Set aecSet superpassword Set passwordSet codec2 Set codec3Command store Set upgradeaddrRelevant Usage store Command load Relevant Usage load Command exitFtp command Syntax description ftp value Command ping Syntax description ping IP addressRelevant usage ftp  Call with ip address Usage of AG-168V FXSCall when Pstn first Dual mode enabled Telnet command to updating Upgrade AG-168V IP GatewayUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved