Gateway user manual Usage of AG-168V FXS,  Call with ip address

Page 36

AG-168V SIP GATEWAY User Manual (V1.42)

Note All the Telnet commands of AG-168V IP GATEWAY should be written in low case and the password is case sensitive.

￿The usage of AG-168V FXS

￿Receving calls

No matter what calls from IP or PSTN , the phone connecting to AG-168V FXS port will ring . Mention you that there is call. You can pick up the handset or the speaker of the normal phone.

￿Call when Dual mode disabled

Call with phone number:

1 Dial with handset: pickup the handset, dial after dial tone

2 Dial with speaker: press speaker, dial after dial tone

3.Redial: press redial and call the last number

Call with ip address:

If not registered in gatekeeper and gateway disabled, dial with the ip address:

1.pickup the handset, call after dial tone, press # after numbers

2.Press speaker, input ip address after dial tone, press # after numbers

Notice: Dial with ip address, using * for — .

Call with GATEWAY

If registered in Gatekeeper dial the number.

Pick up the handset or Press speaker, dial the number after the dial tone

36

Image 36
Contents Function Keys of AG-168V SIP Gateway Introduction Features Hardware SoftwareStandard and Protocol Operating requirementsElectric requirements Gateway supports following standard and protocolInstallation SizeConfiguration Phone Keypad setupConfigured by WEB Network Setting Is192.169.1.100Page Protocol Setting Page  phone number set local ID Register portPhone settings Page  inner line prefix default is Audio settings Other settings G729g7231g711ug711a and gsmPhonenumber check phonenumber auto upgrade Configured by PalmTool Button to confirm the modificationTelnet Configuration AG-168V Telnet Commands ExplanationComman Detail description of AG-168V Telnet commands Command ? Command getGet SetInnerline 1enable Localprefix Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service Set service typeSet router Set dnsSet serviceaddr Set serviceidSet nattraversal Set nataddrSet signalport Set natttlSet GATEWAYnumber Set accountSet registerttl Set rtptosSet rtpport Set jittersizeSet dtmf payload Set dialplanSet dialnumber Set dddcodeSet iddprefix Set dddprefixSet innerline Set localpreifxSet fwdpoweroff Set digitmapSet fwdnumber Set fwdalwaysSet 6.3k Set vadSet agc Set aecSet password Set superpasswordSet codec2 Set codec3Set upgradeaddr Command storeRelevant Usage store Command load Relevant Usage load Command exitCommand ping Syntax description ping IP address Ftp command Syntax description ftp valueRelevant usage ftp Usage of AG-168V FXS  Call with ip addressCall when Pstn first Dual mode enabled Upgrade AG-168V IP Gateway Telnet command to updatingUsing Http Prepare Updated program through FTPHardwareTagServiceTypeProtocolXXX.bin Ocheck.The configuration All rights reserved