Making and receiving calls
To make an external call
Ensure the handset is switched ON.
•Press the PHONE button. You will hear the dial tone. The ‘In Use’ light on the base station comes on.
•Dial the number. The phone calls the number and the display shows the number you have dialled.
Alternatively, you can enter the phone number you want first, check that it is correct, and then press the PHONE button to dial.
If another handset is already being used to make an external call, your handset will display
To end a call
•Press the END CALL button. Or
•Place the handset back on the base station.
To receive an external call
When the phone rings the display flashes EXT.
•Press the PHONE button on the handset and speak.
Or
•If the handset is on the base station or charging station, simply lift it up and speak. You do not need to press the PHONE button.
•At the end of the call, either press the END CALL button or replace the handset on the base station.
To redial the last external number
LNR
•Press the PHONE button.
•Press the LNR button. The last external number you called will be redialled automatically.
•Press the END CALL button at the end of your call, or replace the handset on the box.
To redial any of the last 5 external
numbers
LNR
•Press and release the LNR button until the number you want is displayed.
•Press the PHONE button to dial.
•To end the call, press the END CALL button or replace the handset on the base.
Call timer
Your Diverse 2010 automatically times the duration of all external calls. The handset display shows the call duration both during your call and for a few seconds after it is completed.
11