BT Diverse 2010 manual Additional features, Setting to Tone or Pulse dialling

Page 18

Additional features

Your Diverse 2010 has many useful features which can be programmed to best suit the way you wish to use your phone.

1.Setting to Tone or Pulse dialling

Your Diverse 2010 is pre-set to TONE dialling – you will hear a tone beep each time you dial a number. Tone dialling is suitable for all modern digital exchanges. If you cannot make a call with TONE dialling, you may need to switch to PULSE dialling.

To set PULSE dialling

	#	1		0	DEF	DEF
STO			LNR		3	3

•Press the STO button then the

# button.

•Press the 1 button.

•Enter the current system code. (Standard setting 0000.)

•Press the LNR button.

•Press the buttons 0, 3, 3.

•Press the STO button to set pulse dialling.

To re-set to TONE dialling

	#	1		0	DEF	PQRS
STO	#	1	LNR	0	3	7

•Press the STO button then the

# button.

•Press the 1 button.

•Enter the current system code. (Standard setting 0000.)

•Press the LNR button.

•Press the buttons 0, 3, 7.

•Press the STO button to set tone dialling.

To set Time Break Recall with Tone

dialling

	#	1		0	DEF	PQRS
STO			LNR		3	7

•Press the STO button.

•Press the # button.

•Press the 1 button.

•Enter the current system code. (Standard setting 0000.)

•Press the LNR button.

•Press the buttons 0, 3, 7.

•Press the STO button.

To set to Earth Recall with Tone dialling

	#	1		0	DEF	MNO
STO			LNR		3	6

•Press the STO button.

•Press the # button.

•Press the 1 button.

•Enter the current system code. (Standard setting 0000.)

•Press the LNR button.

•Press the buttons 0, 3, 6.

•Press the STO button.

15

Image 18

Contents Diverse For your records Base Station PIN Number Handset PIN NumberAt a glance INTDiverse Base station underside view Power cord Telephone Line cord This guide Hints and tips boxesIntroducing the Diverse Building up a phone systemSetting up General cleaningFollow these steps to get your Diverse 2010 ready for use Connect the power cable Install the rechargeable batteries in the handset Fit the handset Belt clipBattery low warning Battery display when inserting or replacing a batteryBattery performance Getting the most out of your batteriesIf the symbol flashes Using your Diverse To switch to Protected when Handset is onOn/Off and Protected modes To end a call Call timerTo make an external call To receive an external callTo receive an internal call To page a handset from the base stationTo make an internal intercom call to Another handset To make an internal call to all HandsetsTo transfer an external call between Handsets Quick call transferTo store a number To speed dial a number stored on MemoryTo clear all the numbers stored on a Handset’s memory Additional features Setting to Tone or Pulse diallingSecurity code and handset PIN To change a system code for Diverse 2010 base stationAdjusting the ear piece volume Adjusting volumes and tonesTo adjust the ringer volume Handset To adjust the tone of the handset‘Confirmation’ tones To adjust the ringer volume Base stationTo adjust the tone of the base station Ringer ‘Wrong key’ tone‘Range warning’ tone ‘Settings confirmation’ toneBattery warning tone ‘In-range’ toneTo reset your Diverse 2010 handset to the original settings Secrecy Call allocationTo set which handset will receive ring Priority To set the number of rings on ring PriorityTo add and remove handsets that Respond to group ringing To cancel your own ‘special numbers’ Call barringTo store your own ‘special numbers’ Using your Diverse 2010 with a switchboard Entering access codesTo insert an access code Setting the access pause At the base station To register a handsetPlease Note To remove a handset registered at Base stationHow to set up multiple base stations and handsets Operating with additional base stationsTo set/clear the base station number Display from a handset To set your handset for automatic base selectionSTO INT Within the warranty period MaintenanceService Outside the warranty periodHelp Emergency callsReplacing handset batteries When connected to a switchboard Environment If the power failsTechnical information ApprovalTechnical specification Index RENOffices in Europe, North America, Japan and Asia Pacific 504116