BT Diverse 2010 manual Maintenance, Service, If you have to return your Diverse

Page 34

Maintenance

General cleaning

Simply clean the handset and base station with a damp (not wet) cloth or antistatic wipe. Never use a dry cloth as this may cause a static shock. Never spray cleaning fluid directly onto the telephone.

Service

Within the warranty period

If you experience a problem with your Diverse 2010 base station or handset you should contact the Diverse Helpline on 0345 908070. Calls are charged at local rates. If the problem is not remedied, you will be advised to contact your original point of purchase.

Some suppliers offer extended warranty schemes for cover outside the initial

12-month period. Please ask them for details.

Outside the warranty period

If your Diverse 2010 needs repair after the warranty period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you call the Diverse Helpline on 0345 908070 and ask for details of our recommended repair agents.

If you have to return your Diverse 2010

Pack the base station and handset securely, preferably in the original packing. All parts must be returned, including line cords, power supply unit and original batteries. We cannot take responsibility for goods damaged in transit.

31

Image 34

Contents Diverse For your records Base Station PIN Number Handset PIN NumberAt a glance INTDiverse Base station underside view Power cord Telephone Line cord This guide Hints and tips boxesIntroducing the Diverse Building up a phone systemGeneral cleaning Setting upFollow these steps to get your Diverse 2010 ready for use Connect the power cable Install the rechargeable batteries in the handset Fit the handset Belt clipBattery low warning Battery display when inserting or replacing a batteryBattery performance Getting the most out of your batteriesIf the symbol flashes To switch to Protected when Handset is on Using your DiverseOn/Off and Protected modes To end a call Call timerTo make an external call To receive an external callTo receive an internal call To page a handset from the base stationTo make an internal intercom call to Another handset To make an internal call to all HandsetsTo transfer an external call between Handsets Quick call transferTo speed dial a number stored on Memory To store a numberTo clear all the numbers stored on a Handset’s memory Additional features Setting to Tone or Pulse diallingSecurity code and handset PIN To change a system code for Diverse 2010 base stationAdjusting the ear piece volume Adjusting volumes and tonesTo adjust the ringer volume Handset To adjust the tone of the handset‘Confirmation’ tones To adjust the ringer volume Base stationTo adjust the tone of the base station Ringer ‘Wrong key’ tone‘Range warning’ tone ‘Settings confirmation’ toneBattery warning tone ‘In-range’ toneTo reset your Diverse 2010 handset to the original settings Secrecy Call allocationTo set the number of rings on ring Priority To set which handset will receive ring PriorityTo add and remove handsets that Respond to group ringing Call barring To cancel your own ‘special numbers’To store your own ‘special numbers’ Entering access codes Using your Diverse 2010 with a switchboardTo insert an access code Setting the access pause At the base station To register a handsetPlease Note To remove a handset registered at Base stationHow to set up multiple base stations and handsets Operating with additional base stationsTo set/clear the base station number Display from a handset To set your handset for automatic base selectionSTO INT Within the warranty period MaintenanceService Outside the warranty periodEmergency calls HelpReplacing handset batteries When connected to a switchboard Environment If the power failsTechnical information ApprovalTechnical specification Index RENOffices in Europe, North America, Japan and Asia Pacific 504116