BT Diverse 2010 manual Call barring, To store your own ‘special numbers’

Page 26

6. Call barring

Emergency Services 999 and 112 calls can still be made. From switchboards you can dial access code 9 followed by 999 or 112, RCL button 999 or RCL button 112.

To bar and cancel an individual handset from making external calls

You can lock your handset and bar all outgoing calls. Call barring prevents unauthorised use of your handset. Incoming calls are not affected.

STO

#

1

LNR

1

Press the STO button.

Press the # button.

Press the 1 button.

Enter the system code. (Standard setting is 0000.)

Press the LNR button.

Press the button.

Press the 1 button.

Enter the internal number of the handset you wish to control.

Either

Press 0 to prevent the selected handset from making external calls. It can still make internal calls and external emergency calls.

Or

Press 1 to allow the selected handset making external calls.

Then

Press STO to confirm.

If you are using the Diverse Executive Handset please refer to that user guide

To store your own ‘special numbers’

Before call barring has been set, you can add up to four special numbers, each up to 16 digits long. You can do this from any handset.

 

#

ABC

JKL

 

STO

2

5

LNR

 

 

 

Press the STO button.

Press the # button.

Press the 2 button.

Press the 5 button.

Enter the system code (default 0000).

Each time you press the LNR button, the display shows the four memories for your emergency number 1 , 2 , 3 , 4 , Select the one you want.

Enter your emergency number.

Press the STO button to confirm. You hear a confirmation beep.

You can overwrite each number by repeating these steps.

To cancel your own ‘special numbers’

 

#

ABC

PQRS

STO

2

7

Press the STO button.

Press the # button.

Press the 2 button.

Press the 7 button.

Enter the system code (default 0000).

Press the STO button.

My Emergency numbers are

1

2

3

4

23

Image 26
Contents Diverse For your records Base Station PIN Number Handset PIN NumberAt a glance INTDiverse Base station underside view Power cord Telephone Line cord This guide Hints and tips boxesIntroducing the Diverse Building up a phone systemFollow these steps to get your Diverse 2010 ready for use Setting upGeneral cleaning Connect the power cable Install the rechargeable batteries in the handset Fit the handset Belt clipBattery low warning Battery display when inserting or replacing a batteryBattery performance Getting the most out of your batteriesIf the symbol flashes On/Off and Protected modes Using your DiverseTo switch to Protected when Handset is on To end a call Call timerTo make an external call To receive an external callTo receive an internal call To page a handset from the base stationTo make an internal intercom call to Another handset To make an internal call to all HandsetsTo transfer an external call between Handsets Quick call transferTo clear all the numbers stored on a Handset’s memory To store a numberTo speed dial a number stored on Memory Additional features Setting to Tone or Pulse diallingSecurity code and handset PIN To change a system code for Diverse 2010 base stationAdjusting the ear piece volume Adjusting volumes and tonesTo adjust the ringer volume Handset To adjust the tone of the handset‘Confirmation’ tones To adjust the ringer volume Base stationTo adjust the tone of the base station Ringer ‘Wrong key’ tone‘Range warning’ tone ‘Settings confirmation’ toneBattery warning tone ‘In-range’ tone To reset your Diverse 2010 handset to the original settings Secrecy Call allocationTo add and remove handsets that Respond to group ringing To set which handset will receive ring PriorityTo set the number of rings on ring Priority To store your own ‘special numbers’ To cancel your own ‘special numbers’Call barring To insert an access code Using your Diverse 2010 with a switchboardEntering access codes Setting the access pause At the base station To register a handsetPlease Note To remove a handset registered at Base stationHow to set up multiple base stations and handsets Operating with additional base stationsTo set/clear the base station number Display from a handset To set your handset for automatic base selectionSTO INT Within the warranty period MaintenanceService Outside the warranty periodReplacing handset batteries HelpEmergency calls When connected to a switchboard Environment If the power failsTechnical information ApprovalTechnical specification Index RENOffices in Europe, North America, Japan and Asia Pacific 504116