Making and transferring calls between handsets
If you have multiple handsets registered with the base, the Diverse 2010 enables two handsets to talk to each other on an internal ‘intercom’ call, while a third handset can be on an external call.
To page a handset from the base station
To locate handsets that are away from the base station.
•Press the GREY button on the base. All handsets registered with the base will ring for 30 seconds.
•To stop paging press the GREY button again.
Or
•Press the PHONE button on the handset.
If you have additional handsets, you can make internal intercom calls between the handsets.
To make an internal intercom call to
another handset
INT
•Press the INT button. Display shows your handset number.
•Enter the number of the handset you want to call. The handset will ring.
•To end the call, press the END CALL button, or replace the handset on the base.
To receive an internal call
•When the handset rings, the display flashes INT plus the number of the handset calling you, – 2 in this example.
•Either press the PHONE button, or simply lift the handset off the base station to receive the call.
To make an internal call to all
handsets
You can call all handsets registered to a base station simultaneously.
INT ✱
•Press the INT button. Display shows your handset number.
•Press the ✱ button. All handsets will ring. The first handset to answer will take the call.
•To end the call, press the PHONE button or replace handset on the base.
If all available handsets are engaged on an internal call and an external call arrives, a Ôcall waitingÕ signal is given. To take the call, either replace the handset on the base, or press END CALL.You can accept the new call when you hear the phone ring.
12