To reset your Diverse 2010 base station
to the original settings
This will reset:
–TONE/PULSE signalling to TONE.
–Access code/pause to NONE.
–Pause after the RCL key to NONE.
–Ring assignment to group ringing.
It will also delete any new settings made for: connections to a switchboard.
This will NOT reset:
–The system code.
–Handset registration settings.
With the handset switched ON.
| # | 1 |
| ABC | JKL | 0 |
STO | LNR | 2 | 5 | |||
|
|
|
|
|
•Press the STO button.
•Press the # button.
•Press the 1 button.
•Enter the system code. (Standard setting is 0000.)
•Press the LNR button.
•Enter the code 2, 5, 0.
•Press the STO button to confirm.
To reset your Diverse 2010 handset to the original settings
This will reset:
–Ringer volume.
–Tone.
–Battery warning tone.
–Range warning tone.
–
–Automatic call acceptance.
–Confirmation tones.
It will delete:
–Numbers stored in the speed dialling memory.
–The last number redial memory.
This will not reset:
–The handset PIN.
–The handset registration.
With the handset switched ON.
TUV
STO 8 MEM
•Press the STO button.
•Press 8 on the keypad.
•Press the MEM button.
•Press the handset PIN code. (Standard setting is 0000.)
•Press the STO button.
If you are experiencing problems, please call the Diverse Helpline on 0345 908070.
20