BT Diverse 2010 manual Setting the access pause

Page 28

Setting the access pause

You can change the length of a pause before the dial tone commences. The standard setting is for a three second pause.

CODE

PAUSE

024

1 second

025

2 second

020

3 second

021

6 second

253

to clear all access codes

 

 

The handset must be switched ON.

STO

#

1

LNR

Press the STO button.

Press # button.

Press the 1 button.

Enter the system code. (Standard setting is 0000.)

Press the LNR button.

Enter one of the three digit codes above to set the length of pause you want.

Press the STO button to confirm.

If you are experiencing problems, please call the Diverse Helpline on 0345 908070 or BT on 154.

25

Image 28
Contents Diverse For your records Base Station PIN Number Handset PIN NumberAt a glance INTDiverse Base station underside view Power cord Telephone Line cord This guide Hints and tips boxesIntroducing the Diverse Building up a phone systemGeneral cleaning Setting upFollow these steps to get your Diverse 2010 ready for use Connect the power cable Install the rechargeable batteries in the handset Fit the handset Belt clipBattery display when inserting or replacing a battery Battery performanceBattery low warning Getting the most out of your batteriesIf the symbol flashes To switch to Protected when Handset is on Using your DiverseOn/Off and Protected modes Call timer To make an external callTo end a call To receive an external callTo page a handset from the base station To make an internal intercom call to Another handsetTo receive an internal call To make an internal call to all HandsetsTo transfer an external call between Handsets Quick call transferTo speed dial a number stored on Memory To store a numberTo clear all the numbers stored on a Handset’s memory Additional features Setting to Tone or Pulse diallingSecurity code and handset PIN To change a system code for Diverse 2010 base stationAdjusting volumes and tones To adjust the ringer volume HandsetAdjusting the ear piece volume To adjust the tone of the handsetTo adjust the ringer volume Base station To adjust the tone of the base station Ringer‘Confirmation’ tones ‘Wrong key’ tone‘Settings confirmation’ tone Battery warning tone‘Range warning’ tone ‘In-range’ toneTo reset your Diverse 2010 handset to the original settings Secrecy Call allocationTo set the number of rings on ring Priority To set which handset will receive ring PriorityTo add and remove handsets that Respond to group ringing Call barring To cancel your own ‘special numbers’To store your own ‘special numbers’ Entering access codes Using your Diverse 2010 with a switchboardTo insert an access code Setting the access pause At the base station To register a handsetPlease Note To remove a handset registered at Base stationHow to set up multiple base stations and handsets Operating with additional base stationsTo set/clear the base station number Display from a handset To set your handset for automatic base selectionSTO INT Maintenance ServiceWithin the warranty period Outside the warranty periodEmergency calls HelpReplacing handset batteries When connected to a switchboard If the power fails Technical informationEnvironment ApprovalTechnical specification Index RENOffices in Europe, North America, Japan and Asia Pacific 504116