Topcom Butler B3500/3501/Twin
To change the dialling mode:
1.Enter the menu by pressing 
/OK
2.Select setup using the up 
and down 
keys
3.Press OK
4.Select DIAL MODE using the up 
and down 
keys
5.Press OK
6.Select the dialling mode using the up 
and down 
keys
7.Press OK to validate
4.8 FLASH TIME DURATION
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select RECALL using the up 
and down 
keys
5.Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)
4.9 AUTOMATIC ANSWER
When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This is the default setting, but can be set OFF:
1Enter the menu by pressing 
/OK
2Select HANDSET using the up 
and down 
keys
3 Press OK
4 Select AUTO ANSWER using the up 
and down 
keys 5 Select ON (for automatic answer) or OFF
6 Press OK
4.10 RESET
It is possible to return the phone to the original default configuration. This is the configuration which was installed when you first received the telephone.
To return to default settings:
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select DEFAULT using the up 
and down 
keys
5.Press OK
6.Enter the 4 digit PIN code (default =0000). Press OK.
7.Press again OK to validate
DEFAULT PARAMETERS ARE: |
|
Low battery beeps | ON |
Out of range warning beeps | ON |
Key click | ON |
Auto answer | ON |
Internal melody | 1 |
Internal volume | 2 |
External melody | 3 |
External volume | 2 |
Ear volume | 3 |
Phonebook | Empty |
Call log list | Empty |
Redial list | Empty |
Pin code | 0000 |
Dial mode | DTMF |
Keypad lock | OFF |
ENGLISH
Topcom Butler B3500/3501/Twin | 15 |