ENGLISH
4. PERSONALISATION
4.1 ADJUSTING SPEAKER VOLUME
There are two ways to set the speaker volume:
4.1.1 Speaker volume during call
During conversation, press the up 
or down 
key to change the volume accordingly.
4.1.2 Set the default speaker volume
1.Enter the menu by pressing 
/OK
2.Select HANDSET using the up 
and down 
keys
3.Press OK
4.Select EAR VOL using the up 
and down 
keys
5.Press OK
6.Select the desired volume (1 to 5 ) by means of the up 
and down 
key.
7.Press OK
A double bleep confirms the validation of your choice
Note: The handsfree volume is also adjust together with the receiver in the handset as above described
4.2 ADJUSTING THE RING VOLUME
4.2.1 Handset ring
1.Enter the menu by pressing 
/OK
2.Select HANDSET using the up 
and down 
keys
3.Press OK
4.Select RING VOL using the up 
and down 
keys
5.Press OK
6.Select the desired volume (OFF or 1 to 5 )
7.Press OK to confirm or 
to return to the previous menu.
Note: Every programmation is confirmed at the end by a double or single long beep. A double bleep confirms the validation of your choice
A long bleep signifies that the modification has not been taken into account.
4.2.2 Base ring
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select BASE VOL using the up 
and down 
keys
5.Press OK
6.Select the desired volume (OFF or 1 to 5 )
7.Press OK to confirm or 
to return to the previous menu.
4.3 CHOOSING THE RING MELODY
The base and each hand set can ring with a different melody.
The handsets can ring with a different melody according to whether the incoming call is internal or external.
4.3.1 Base melody
1.Enter the menu by pressing 
/OK
2.Select SETUP using the up 
and down 
keys
3.Press OK
4.Select BASE MEL using the up 
and down 
keys
5.Press OK
6.Select the melody of your choice ( 1 to 5 ) using the up 
and down 
keys
7.Press OK to confirm or 
to return to the previous menu.
Topcom Butler 2511 Deluxe | 11 |