Installation
Wall Mounting
Your phone base unit is designed to mount on a standard telephone wall plate. Wall mounting is optional. See position one below for instructions.
Desk/Table Installation
To place your base unit on a desk or table, insert the desk/wall bracket as instructed below and shown in position one or two, depending on your preference of how you’d like the base unit to be angled.
Getting Started
� |
� |
Position One
To mount your phone on a wall, or to place it on a table or desk, refer to the diagrams illustrating position one.
•First insert the lower portion of the bracket into the grooves in the base, then snap the upper portion into place.
•Mount the base on the wall by positioning the base unit so the mounting studs will fit into the holes on the base and wall mount bracket. Slide the base unit down on the mounting studs until it locks into place.
Position Two
This position is an alternate way to install your phone on a table or desk. Position two allows a different viewing angle to your handset and base unit. Refer to the position two diagrams above.
•Insert the upper portion of the bracket into the grooves in the base.
•Snap the lower portion into place.
www.vtechphones.com | GETTING STARTED 7 |