VTech CS6328-4, CS6329-5, CS6329-4, CS6328-5, CS6329-2, CS6328-2, CS6328-3, CS6329-3 user manual Battery

Page 49

Appendix

Battery

It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation	Operating time

While in handset use (talking*)	Up to seven hours

While in speakerphone mode (talking*)	Up to five hours

While not in use (standby**)	Up to seven days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps.

•A battery is properly installed and the screen is blank.

•LOW BATTERY or PLACE IN CHARGER shows on the handset screen.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

•Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

45

Image 49

Contents User’s manual Congratulations Table of contents Appendix Answering system operationIndex Getting started Parts checklistTelephone base and charger installation Charge light Battery installationPlace in Charger Battery chargingTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationUSE light Telephone base layoutFlash Handset layoutMENU/SELECT Ringer volume telephone base Telephone settingsRinger volume handset Ringer toneLCD language To manually turn off these indicatorsClear voicemail Press MENU/SELECT to select LCD languageSet date/time Key toneSet date/time, then press MENU/SELECT Home area code Dial modeHome area code, then press MENU/SELECT Answering system set up Answering system settingsAnswer ON/OFF To turn on or off with the telephone baseNumber of rings Call screeningPress MENU/SELECT to select Call screening Message alert tone Remote access codeAnnouncement Record your own announcement Play your announcementDelete your announcement Press MENU/SELECT to select AnnouncementTelephone operation Temporary ringer silencing MuteTemporary tone dialing Find handsetTo access a number in the call log while on a call To access a number in the directory while on a callTo access a number in the redial list while on a call Call waitingDial a redial entry Redial listDelete from redial list Multiple handset useAnswer an incoming call during an intercom call IntercomScreen shows Calling handset Shows Calling handsetHandset X is Calling Share an outside callDirectory Empty Directory Full Already Saved DirectoryEnter Name Store a directory entryCharacters by number of key presses Character chartAlphabetical search Search the directoryDial a directory entry Delete from the directory Edit a directory entryShows Edit Number Delete contact?Store a speed dial entry Speed dialDial a speed dial number About caller ID Delete a speed dial entryCall log Memory matchReview the call log Missed calls indicatorDial a call log entry View dialing optionsDisplays Edit Number Save a call log entry to the directoryCall log display screen messages Delete from the call logAnswering system and voicemail Answering system operationMessage capacity Call intercept New message indicationMessage playback To play messages with the telephone baseTo play messages with a handset Delete all messagesTo delete all messages with the telephone base To delete all messages with a handsetTo record a memo Record and play memosWindow display Description Message window displaysCommand Function Remote accessHandset display screen messages AppendixCommunication between handset Telephone base lights Handset and telephone base indicators Handset lightsHandset icons Battery Add and register a handset optional Expand your telephone systemReplace a handset My telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outTelephone does not ring when there is an incoming call LOW Battery shows on screenCharge light is off My handset beeps and is not performing normally My caller ID features are not working properly Hear other calls when using the telephoneHear noise on the cordless handset and the keys do not work Registration Failed appears on the handsetOUT of Range or no PWR AT Base shows in the handset screen Caller ID entries do not match the numbers I need to dialNEW Voicemail and show on the display and I don’t know why Outgoing announcement is not clear Cannot retrieve voicemail messagesAnswering system does not record messages Messages on the answering system are very difficult to hear Answering system does not respond to remote commandsMessages on the answering system are incomplete Common cures for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersTaking care of your telephone MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002828-050-100