VTech CS6328-2, CS6329-5, CS6329-4, CS6328-5, CS6329-2, CS6328-4, CS6328-3, CS6329-3 Replace a handset

Page 51

Appendix

Replace a handset

If you want to replace a handset or reassign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset.

To make deregistration easier, read all of the instructions on this page before you begin.

To deregister all handsets:

1.Press and hold /FIND HANDSET on the telephone base for about

10 seconds (until the IN USE light on the telephone base turns on and starts to flash), then release /FIND HANDSET.

2.Press and release /FIND HANDSET again. You must press

/FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes for approximately seven seconds.

3.The deregistration process takes about 10 seconds to complete. All handsets show 1.Press Find HS on base 4 sec and 2.Then press

# on Handset alternately when the deregistration completes.

If deregistration fails, you may need to reset the telephone and try again. To reset:

1.Pick up the registered handset and then press /FLASH.

2.Press OFF/CLEAR and place the handset back in the telephone base.

-OR-

1.Unplug the power from the telephone base, then plug it back in.

You cannot deregister a handset if any system handset is in use.

47

Image 51

Contents User’s manual Congratulations Table of contents Answering system operation AppendixIndex Getting started Parts checklistTelephone base and charger installation Charge light Battery installationPlace in Charger Battery chargingTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationUSE light Telephone base layoutFlash Handset layoutMENU/SELECT Ringer tone Telephone settingsRinger volume telephone base Ringer volume handsetPress MENU/SELECT to select LCD language To manually turn off these indicatorsLCD language Clear voicemailKey tone Set date/timeSet date/time, then press MENU/SELECT Dial mode Home area codeHome area code, then press MENU/SELECT To turn on or off with the telephone base Answering system settingsAnswering system set up Answer ON/OFFCall screening Number of ringsPress MENU/SELECT to select Call screening Remote access code Message alert toneAnnouncement Press MENU/SELECT to select Announcement Play your announcementRecord your own announcement Delete your announcementTelephone operation Find handset MuteTemporary ringer silencing Temporary tone dialingCall waiting To access a number in the directory while on a callTo access a number in the call log while on a call To access a number in the redial list while on a callMultiple handset use Redial listDial a redial entry Delete from redial listShows Calling handset IntercomAnswer an incoming call during an intercom call Screen shows Calling handsetHandset X is Calling Share an outside callDirectory Empty Directory Full Already Saved DirectoryEnter Name Store a directory entryCharacters by number of key presses Character chartSearch the directory Alphabetical searchDial a directory entry Delete contact? Edit a directory entryDelete from the directory Shows Edit NumberSpeed dial Store a speed dial entryDial a speed dial number About caller ID Delete a speed dial entryCall log Memory matchReview the call log Missed calls indicatorDial a call log entry View dialing optionsDisplays Edit Number Save a call log entry to the directoryCall log display screen messages Delete from the call logAnswering system operation Answering system and voicemailMessage capacity To play messages with the telephone base New message indicationCall intercept Message playbackTo delete all messages with a handset Delete all messagesTo play messages with a handset To delete all messages with the telephone baseTo record a memo Record and play memosWindow display Description Message window displaysCommand Function Remote accessHandset display screen messages AppendixCommunication between handset Handset and telephone base indicators Handset lights Telephone base lightsHandset icons Battery Add and register a handset optional Expand your telephone systemReplace a handset Cannot dial out TroubleshootingMy telephone does not work at all There is no dial toneLOW Battery shows on screen Telephone does not ring when there is an incoming callCharge light is off My handset beeps and is not performing normally Registration Failed appears on the handset Hear other calls when using the telephoneMy caller ID features are not working properly Hear noise on the cordless handset and the keys do not workCaller ID entries do not match the numbers I need to dial OUT of Range or no PWR AT Base shows in the handset screenNEW Voicemail and show on the display and I don’t know why Cannot retrieve voicemail messages Outgoing announcement is not clearAnswering system does not record messages Answering system does not respond to remote commands Messages on the answering system are very difficult to hearMessages on the answering system are incomplete Common cures for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersTaking care of your telephone MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002828-050-100