Cisco Systems 4 manual To Set Up the PBXLink Box

Page 18

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

Setting Up the PBXLink Box

Step 18 Click Send.

Step 19 When the firmware upgrade is complete, exit HyperTerminal.

Step 20 Repeat Step 5 through Step 19 for all remaining PBXLink boxes.

Step 21 Connect the PBXLink boxes to the phone system and to the Cisco Unity server.

To Set Up the PBXLink Box

Step 1 On the PBXLink box, press Cancel until the main menu appears (the PBXLink version appears in the display).

Step 2 On the main menu, press the Up or Down arrow to select Configuration and press OK. Step 3 On the Configuration menu, press the Up or Down arrow to select Integration.

Step 4 Confirm that the Integration option is set to Stopped.

If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped, and press OK.

Step 5 On the Configuration menu, press the Up or Down arrow to select PBX Type and press OK. Step 6 On the PBX Type menu, press OK.

Step 7 On the Select PBX Type menu, press the Right or Left arrow to select either Lucent 2 wire or Lucent 4 wire and press OK.

If the setting that you select is not the same as the setting that first appeared, the PBXLink box restarts. Step 8 If the PBXLink box does not restart, on the PBX Type menu, click Cancel.

If the PBXLink box restarts, on the main menu, press the Up or Down arrow to select Configuration and press OK.

Step 9 On the Configuration menu, press the Up or Down arrow to select PBX Options and press OK. Step 10 On the PBX Options menu, press the Up or Down arrow to select Phone Set and press OK.

Step 11 On the Phone Set menu, press the Right or Left arrow to select either 8434D or 7434D to match the digital port setting that you entered with the Add Station command. Then press OK.

Step 12 On the PBX Options menu, press the Up or Down arrow to select Voice Coding and press OK.

Step 13 On the Voice Coding menu, press the Right or Left arrow to select one of the following options and press OK:

•North America—Mu Law

•All other locations—A Law

Step 14 On the PBX Options menu, press the Up or Down arrow to select Analog Ports on A and press OK.

Step 15 In the Analog Ports on A field, enter the number of voice messaging ports that Port A will monitor and press OK.

Step 16 If you setting up a PBXLink-24 box, continue to Step 17.

If you are setting up a PBXLink-48 box, do the following substeps:

a.On the PBX Options menu, press the Up or Down arrow to select Analog Ports on B, and press OK.

b.In the Analog Ports on B field, enter the number of voice messaging ports that Port B will monitor and press OK.

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

18

OL-3105-15

 

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Integration Tasks Task List to Create the IntegrationTask List to Delete an Existing Integration RequirementsTask List to Make Changes to an Integration Phone SystemConfiguration for 24 or Fewer Ports Integration DescriptionCisco Unity Server Configuration for 25 to 48 Ports Configuration for 49 to 72 PortsPBXLink Box Connections Integration Functionality Integrations with Multiple Phone SystemsNumber of Voice Messaging Ports to Install Field ConsiderationsPreparing for Programming the Phone System Number of Voice Messaging Ports That Will Answer CallsOption Setting Programming the Avaya Definity/PBXLink Phone SystemTo Program the Phone System Button Assignment Setting Call-appr NormalFeature Button Number Setting Call-apprAbrdg-appr Extn 4th voice mail extension Abrdg-appr Extn 6th voice mail extension Vector Definition Options for a Single Digital Port Option Setting Route to number 2010 if unconditionally To Set Up User Phones Setting Up the PBXLink Box To Update the PBXLink Box FirmwareTo Set Up the PBXLink Box Page LTN Number Voice Messaging Port Value Following substeps LTN Number Voice Messaging Port Value 0007 0009 LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value 0002 Field Setting To Create an IntegrationSettings for the Enter MWI Codes Selection Control Effect Click Save Testing the Integration To Enable MWI Extensions That Begin with ZeroTo Set Up the Test Configuration Select New Exchange Subscriber To Test an External Call with Release Transfer To Test Listening to MessagesTo Set Up Supervised Transfer on Cisco Unity To Test Supervised TransferTo Delete the Test Subscriber Integrating a Secondary Server for Cisco Unity Failover RequirementsIntegration Description Setting Up the Secondary Server for Failover To Set Up the Secondary Server for FailoverClick Programs Cisco Unity Edit Switch Utility Changing the Settings for an Existing Integration To Change the Settings for an IntegrationTo Delete an Existing Integration Deleting an Existing IntegrationAlternate Extensions Reasons to Use Alternate ExtensionsSetting Up Alternate Extensions How Alternate Extensions WorkTo Add Administrator-Defined Alternate Extensions Alternate MWIsTo Modify or Delete Alternate Extensions Setting Up Alternate MWIs To Set Up Alternate MWIs for ExtensionsTo Modify or Delete Alternate MWIs Conventions Convention DescriptionProduct Documentation DVD Obtaining DocumentationCisco.com Ordering DocumentationReporting Security Problems in Cisco Products Documentation FeedbackCisco Product Security Overview Obtaining Technical Assistance Cisco Technical Support & Documentation WebsiteSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Page OL-3105-15
Top Page Image Contents