Cisco Systems 4 manual 0007

Page 23

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

Setting Up the PBXLink Box

Step 7	In the Setup Random LTNs field, enter the voice messaging port values (not the extension) for the first
	set of voice messaging port as shown in the following table, and press OK.
	Table 22	Random LTN Settings for the First Set of Ports

	LTN Number		Voice Messaging Port Value

	0		0001

	1		0004

	2		0007

	.		<the remaining voice messaging ports in the first set>
	.
	.

Step 8	After all of the voice messaging ports in the first set are set, press Cancel.
Step 9	On the Port A LTNs menu, press Cancel.
Step 10	On the SMDI Options menu, press Cancel.
Step 11	On the Configuration menu, press the Up or Down arrow to select Integration and press OK.
Step 12	On the Integration menu, press the Right or Left arrow to select Started, and press OK.
Step 13	On the second PBXLink box (which has two digital ports), confirm that the PBXLink Integration option
	is set to Stopped by doing the following substeps:

a.On the main menu, press the Up or Down arrow to select Configuration and press OK.

b.On the Configuration menu, press the Up or Down arrow to select Integration.

c.Confirm that the Integration option is set to Stopped.

If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped, and press OK.

Step 14 On the Configuration menu, press the Up or Down arrow to select SMDI Options and press OK. Step 15 On the SMDI Options menu, press the Up or Down arrow to select Port A LTNs, and press OK.

Step 16	On the Port A LTNs menu, press the Up or Down arrow to select Mode of Operation and press OK.
Step 17	On the Mode of Operation menu, press the Right or Left arrow to select Random and press OK.
Step 18	On the Port A LTNs menu, press the Up or Down arrow to select Setup Random LTNs and press OK.
Step 19	In the Setup Random LTNs field, enter the voice messaging port values (not the extension) for the second
	set of voice messaging port as shown in the following table, and press OK.
	Table 23	Random LTN Settings for the Second Set of Ports

	LTN Number		Voice Messaging Port Value

	0		0002

	1		0005

	2		0008

	.		<the remaining voice messaging ports in the second set>
	.
	.

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

	OL-3105-15	23

Image 23

Contents Task List to Create the Integration Integration TasksPhone System RequirementsTask List to Make Changes to an Integration Task List to Delete an Existing IntegrationCisco Unity Server Configuration for 24 or Fewer PortsIntegration Description PBXLink Box Connections Configuration for 25 to 48 PortsConfiguration for 49 to 72 Ports Integrations with Multiple Phone Systems Integration FunctionalityField Considerations Number of Voice Messaging Ports to InstallNumber of Voice Messaging Ports That Will Answer Calls Preparing for Programming the Phone SystemTo Program the Phone System Option SettingProgramming the Avaya Definity/PBXLink Phone System Call-appr Normal Button Assignment SettingCall-appr Feature Button Number SettingAbrdg-appr Extn 4th voice mail extension Abrdg-appr Extn 6th voice mail extension Vector Definition Options for a Single Digital Port Option Setting Route to number 2010 if unconditionally To Set Up User Phones To Update the PBXLink Box Firmware Setting Up the PBXLink BoxTo Set Up the PBXLink Box Page LTN Number Voice Messaging Port Value Following substeps LTN Number Voice Messaging Port Value 0007 0009 LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value 0002 To Create an Integration Field SettingSettings for the Enter MWI Codes Selection Control Effect Click Save To Set Up the Test Configuration Testing the IntegrationTo Enable MWI Extensions That Begin with Zero Select New Exchange Subscriber To Test Listening to Messages To Test an External Call with Release TransferTo Delete the Test Subscriber To Set Up Supervised Transfer on Cisco UnityTo Test Supervised Transfer Integration Description Integrating a Secondary Server for Cisco Unity FailoverRequirements To Set Up the Secondary Server for Failover Setting Up the Secondary Server for FailoverClick Programs Cisco Unity Edit Switch Utility To Change the Settings for an Integration Changing the Settings for an Existing IntegrationReasons to Use Alternate Extensions Deleting an Existing IntegrationAlternate Extensions To Delete an Existing IntegrationHow Alternate Extensions Work Setting Up Alternate ExtensionsTo Modify or Delete Alternate Extensions To Add Administrator-Defined Alternate ExtensionsAlternate MWIs To Modify or Delete Alternate MWIs Setting Up Alternate MWIsTo Set Up Alternate MWIs for Extensions Convention Description ConventionsOrdering Documentation Obtaining DocumentationCisco.com Product Documentation DVDCisco Product Security Overview Reporting Security Problems in Cisco ProductsDocumentation Feedback Cisco Technical Support & Documentation Website Obtaining Technical AssistanceDefinitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information Page OL-3105-15