Cisco Systems 4 manual Requirements, Task List to Make Changes to an Integration, Phone System

Page 2

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

Requirements

Task List to Make Changes to an Integration

Use the following task list to make changes to an integration after it has been created.

1.Start the Cisco Unity Telephony Integration Manager (UTIM). See the “Changing the Settings for an Existing Integration” section on page 40.

2.Make the changes you want to the existing integration. See the “Changing the Settings for an Existing Integration” section on page 40.

Task List to Delete an Existing Integration

Use the following task list to remove an existing integration.

1.Start the Cisco Unity Telephony Integration Manager (UTIM). See the “Deleting an Existing Integration” section on page 41.

2.Delete the existing integration. See the “Deleting an Existing Integration” section on page 41.

Requirements

The Avaya Definity/PBXLink integration supports configurations of the following components:

Phone System

•An Avaya Definity phone system with one or two digital lines connected to the PBX ports on the PBXLink box. The line or lines must be compatible with the 7434D or 8434D digital phones. If vectoring will be used and depending on the phone system, the line or lines may require compatibility with only the 7434D digital phone.

•Bridged mode feature, enabled.

•For each voice messaging port, one analog port connected to the voice cards in the Cisco Unity server.

•The SMDI port in the PBXLink box connected to a serial port (COM1 is the default) on the Cisco Unity server with an RS-232 serial cable. If multiple PBXLink boxes are installed, the SMDI port of the last PBXLink box is connected to the Management port of the first PBXLink box with an RS-232 serial cable. The SMDI port of the first PBXLink box is connected to a serial port (COM1 is the default) on the Cisco Unity server with another RS-232 serial cable. Make sure that the serial protocol parameters for the Management port of the first PBXLink box are set to the same values as the SMDI port.

We recommend that the serial cable have the following construction:

–A maximum of 50 feet (15.24 m) in length

–24 AWG stranded conductors

–Low capacitance—for example, no more than 12 pF/ft (39.4 pF/m) between conductors

–At least 65 percent braided shield over aluminized polymer sleeve around conductors

–UL-recognized overall cable jacket insulation with low dielectric constant

–Braided shield fully terminated to and enclosed by a metal connector backshell

–Gold-plated connector contacts

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

2

OL-3105-15

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Integration Tasks Task List to Create the IntegrationTask List to Delete an Existing Integration RequirementsTask List to Make Changes to an Integration Phone SystemCisco Unity Server Configuration for 24 or Fewer PortsIntegration Description PBXLink Box Connections Configuration for 25 to 48 PortsConfiguration for 49 to 72 Ports Integration Functionality Integrations with Multiple Phone SystemsNumber of Voice Messaging Ports to Install Field ConsiderationsPreparing for Programming the Phone System Number of Voice Messaging Ports That Will Answer CallsTo Program the Phone System Option SettingProgramming the Avaya Definity/PBXLink Phone System Button Assignment Setting Call-appr NormalFeature Button Number Setting Call-apprAbrdg-appr Extn 4th voice mail extension Abrdg-appr Extn 6th voice mail extension Vector Definition Options for a Single Digital Port Option Setting Route to number 2010 if unconditionally To Set Up User Phones Setting Up the PBXLink Box To Update the PBXLink Box FirmwareTo Set Up the PBXLink Box Page LTN Number Voice Messaging Port Value Following substeps LTN Number Voice Messaging Port Value 0007 0009 LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value 0002 Field Setting To Create an IntegrationSettings for the Enter MWI Codes Selection Control Effect Click Save To Set Up the Test Configuration Testing the IntegrationTo Enable MWI Extensions That Begin with Zero Select New Exchange Subscriber To Test an External Call with Release Transfer To Test Listening to MessagesTo Delete the Test Subscriber To Set Up Supervised Transfer on Cisco UnityTo Test Supervised Transfer Integration Description Integrating a Secondary Server for Cisco Unity FailoverRequirements Setting Up the Secondary Server for Failover To Set Up the Secondary Server for FailoverClick Programs Cisco Unity Edit Switch Utility Changing the Settings for an Existing Integration To Change the Settings for an IntegrationTo Delete an Existing Integration Deleting an Existing IntegrationAlternate Extensions Reasons to Use Alternate ExtensionsSetting Up Alternate Extensions How Alternate Extensions WorkTo Modify or Delete Alternate Extensions To Add Administrator-Defined Alternate ExtensionsAlternate MWIs To Modify or Delete Alternate MWIs Setting Up Alternate MWIsTo Set Up Alternate MWIs for Extensions Conventions Convention DescriptionProduct Documentation DVD Obtaining DocumentationCisco.com Ordering DocumentationCisco Product Security Overview Reporting Security Problems in Cisco ProductsDocumentation Feedback Obtaining Technical Assistance Cisco Technical Support & Documentation WebsiteSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Page OL-3105-15
Top Page Image Contents