Cisco Systems 4 manual Settings for the Enter MWI Codes

Page 30

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

Creating a New Integration with the Avaya Definity/PBXLink Phone System

Table 32

Settings for the Enter MWI Codes Page

 

 

 

Field

 

Setting

 

 

 

MWI On Code

 

<the code you specified in the phone system for turning MWIs on>

 

 

 

MWI Off Code

 

<the code you specified in the phone system for turning MWIs off>

 

 

 

Step 10 On the Select Serial Integration Packet Settings page, enter the following settings, then click Next.

Table 33

Settings for the Select Serial Integration Packet Settings Page

 

 

 

Field

 

Setting

 

 

Station Field Length

<the station prefix plus the default extension length; accept the default or click

 

 

another setting; this length is either 10 or 7>

 

 

Default Extension

<the default length of extensions on the phone system; accept the default or

Length

 

click another setting>

 

 

 

Step 11 On the Select COM Port Settings page, enter the following settings, then click Next.

Table 34

Settings for the Select COM Port Settings Page

 

 

 

Field

 

Setting

 

 

 

COM Port

 

<the communications port on the Cisco Unity server that will receive the call

 

 

information; typically, this setting is 1>

 

 

 

Baud Rate

 

<the baud rate that the phone system uses>

 

 

 

Data Bits

 

<the number of data bits that the phone system uses>

 

 

 

Stop Bits

 

<the number of stop bits that the phone system uses>

 

 

 

Parity

 

<the parity that the phone system uses>

 

 

 

Step 12 On the Set Number of Voice Messaging Ports page, enter the number of voice messaging ports on Cisco Unity that you want to connect to the phone system, then click Next.

This number cannot be more than the number of ports on the installed voice cards or the number of ports set up on the phone system.

Step 13 If other integrations already exist, the Enter Trunk Access Code page appears. Enter the extra digits that Cisco Unity must use to transfer calls through the gateway to extensions on the other phone systems with which it is integrated. Then click Next.

Step 14 (Cisco Unity 4.2 and later only) On the Reassign Subscribers page, any subscribers whose phone system integration has been deleted and who are not currently assigned to a phone system integration will appear in the list.

If no subscribers appear in the list, click Next and continue to Step 15.

Otherwise, select the subscribers that you want to assign to this phone system integration and click Next. You can use the following selection controls for selecting subscribers.

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0

30

OL-3105-15

 

 

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Integration Tasks Task List to Create the IntegrationTask List to Delete an Existing Integration RequirementsTask List to Make Changes to an Integration Phone SystemConfiguration for 24 or Fewer Ports Integration DescriptionCisco Unity Server Configuration for 25 to 48 Ports Configuration for 49 to 72 PortsPBXLink Box Connections Integration Functionality Integrations with Multiple Phone SystemsNumber of Voice Messaging Ports to Install Field ConsiderationsPreparing for Programming the Phone System Number of Voice Messaging Ports That Will Answer CallsOption Setting Programming the Avaya Definity/PBXLink Phone SystemTo Program the Phone System Button Assignment Setting Call-appr NormalFeature Button Number Setting Call-apprAbrdg-appr Extn 4th voice mail extension Abrdg-appr Extn 6th voice mail extension Vector Definition Options for a Single Digital Port Option Setting Route to number 2010 if unconditionally To Set Up User Phones Setting Up the PBXLink Box To Update the PBXLink Box FirmwareTo Set Up the PBXLink Box Page LTN Number Voice Messaging Port Value Following substeps LTN Number Voice Messaging Port Value 0007 0009 LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value LTN Number Voice Messaging Port Value 0002 Field Setting To Create an IntegrationSettings for the Enter MWI Codes Selection Control Effect Click Save Testing the Integration To Enable MWI Extensions That Begin with ZeroTo Set Up the Test Configuration Select New Exchange Subscriber To Test an External Call with Release Transfer To Test Listening to MessagesTo Set Up Supervised Transfer on Cisco Unity To Test Supervised TransferTo Delete the Test Subscriber Integrating a Secondary Server for Cisco Unity Failover RequirementsIntegration Description Setting Up the Secondary Server for Failover To Set Up the Secondary Server for FailoverClick Programs Cisco Unity Edit Switch Utility Changing the Settings for an Existing Integration To Change the Settings for an IntegrationTo Delete an Existing Integration Deleting an Existing IntegrationAlternate Extensions Reasons to Use Alternate ExtensionsSetting Up Alternate Extensions How Alternate Extensions WorkTo Add Administrator-Defined Alternate Extensions Alternate MWIsTo Modify or Delete Alternate Extensions Setting Up Alternate MWIs To Set Up Alternate MWIs for ExtensionsTo Modify or Delete Alternate MWIs Conventions Convention DescriptionProduct Documentation DVD Obtaining DocumentationCisco.com Ordering DocumentationReporting Security Problems in Cisco Products Documentation FeedbackCisco Product Security Overview Obtaining Technical Assistance Cisco Technical Support & Documentation WebsiteSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Page OL-3105-15
Top Page Image Contents