AT&T 1480 Charge the handset battery, Set the phone for tone or pulse dialing base only

Page 11

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 8

INSTALLATION

3Charge the handset battery.

•Place the handset in the remote charging stand. The CHARGING light goes on.

•Charge the battery at least 12 hours.

4Check for dial tone.

•After the batteries are charged, lift the handset and press P; you should hear a dial tone.

5Set the time and date displayed on handset screen. If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call.

If you do not have Caller ID service, you can set the date and time manually.

•Press G, then press > until DATE/TIME is displayed. Press S.

•The month is flashing. Use < and > to select the current month.

Press S.

•The day is flashing. Use < and > to select the correct day. Press S.

•The hour is flashing. Use < and > to select the current hour. Press S.

•The minute is flashing. Use < and > to select the correct minute.

Press S.

•AM or PM is flashing. Use < and > to choose between AM and PM. Press S.

6Set the phone for tone or pulse dialing (base only).

•Press P on base.

•Press <or >until DIAL MODE:TONE is displayed.

•Use <and >to select the correct setting.

•Press S to save the setting.

NOTE: Install the base unit and spare handset charger away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

8

Image 11

Contents Part 1 Important Product Information Draft 2/25/02Advanced American Telephones. All rights reserved Contents About Caller ID with Call Waiting Before YOU BeginAbout the Base and the Charger Choosing the Best LocationAbout Call History Table/Desk InstallationBase Installation Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger InstallationSet the phone for tone or pulse dialing base only Charge the handset batteryHeadset Belt ClipTelephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery SaveDisplay Screen Messages Handset and Base Operating RangeStore a Number/Name in the Directory Telephone DirectoryEdit Dial Erase Edit a Number/Name Stored in the DirectoryDial a Number from the Directory Delete a Number/Name Stored in the DirectoryReview Call History Caller ID OperationDelete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallDisplay Screen Messages Turn Off the Base NEW Call IndicatorStore a Call History Record in the Directory About Mailboxes Audible IndicatorsAnswering System Operation Set the ClockPress Uuntil you hear Change announcement Record Your AnnouncementFeature Summary Answering System Feature SetupPlay Messages Adjust Playback VolumeListen to, Save & Delete Messages Message Window Display Call Screening/InterceptRecord a Memo Voice Menu Remote Access CommandsConnect with the Answering System Turn system on End remote access callRecord memo Turn system offBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear other calls while using your phoneIf CL appears in the Message Window If messages are incompleteIf you have difficulty hearing messages If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clearAnswering System Remote CommandsMachine off press #0again Press