AT&T 1480 user manual Handset Charger Installation, Install the handset battery

Page 10

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 7

INSTALLATION

Handset Charger Installation

1Connect the power cord. Feed the power cord through the strain-relief

channel on the bottom of the handset charger. Then plug the cord into an electrical outlet not controlled by a wall switch.

2Install the handset battery.

Use only AT&T Replacement Battery 3301, SKU# 91076.

CHARGING Light: on when handset is in charging stand

a)Remove battery compartment cover by pressing

on the indentation and sliding downward.

c)Place battery pack in

compartment with the wires in the lower left corner, along the bottom of the battery pack.

b)Align two holes in plug with socket pins, and snap the plug into place.

d)Replace cover by sliding it up into place.

7

Image 10

Contents Draft 2/25/02 Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Choosing the Best Location Before YOU BeginAbout the Base and the Charger About Caller ID with Call WaitingAbout Call History Base Installation InstallationTable/Desk Wall Mount Installation Mount the base on the wall Handset Charger Installation Install the handset batteryCharge the handset battery Set the phone for tone or pulse dialing base onlyBelt Clip HeadsetTelephone Operation Telephone Operation Handset Ringer Style/Battery Save Temporary Tone Dialing Base or HandsetOperating Range Display Screen Messages Handset and BaseTelephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Edit Dial EraseDelete a Number/Name Stored in the Directory Dial a Number from the DirectoryCaller ID Operation Review Call HistoryDelete a Specific Call Delete Records from Call HistoryDial a Displayed Number Delete All CallsStore a Call History Record in the Directory Turn Off the Base NEW Call IndicatorDisplay Screen Messages Set the Clock Audible IndicatorsAnswering System Operation About MailboxesRecord Your Announcement Press Uuntil you hear Change announcementAnswering System Feature Setup Feature SummaryListen to, Save & Delete Messages Adjust Playback VolumePlay Messages Record a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Remote Access CommandsVoice Menu Turn system off End remote access callRecord memo Turn system onCharge the Handset Battery Pack BatteriesReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you lose a call after changing channelsIf you have difficulty hearing messages If messages are incompleteIf CL appears in the Message Window If your outgoing announcement isn’t clear If callers cannot leave messages in Mailbox 2 orRemote Commands Answering SystemPress Machine off press #0again