AT&T 1480 user manual Replacing the Handset Battery Pack

Page 31

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 28

BATTERIES

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least

12 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

28

Image 31

Contents Part 1 Important Product Information Draft 2/25/02Advanced American Telephones. All rights reserved Contents About Caller ID with Call Waiting Before YOU BeginAbout the Base and the Charger Choosing the Best LocationAbout Call History Base Installation InstallationTable/Desk Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger InstallationSet the phone for tone or pulse dialing base only Charge the handset batteryHeadset Belt ClipTelephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery SaveDisplay Screen Messages Handset and Base Operating RangeStore a Number/Name in the Directory Telephone DirectoryEdit Dial Erase Edit a Number/Name Stored in the DirectoryDial a Number from the Directory Delete a Number/Name Stored in the DirectoryReview Call History Caller ID OperationDelete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallStore a Call History Record in the Directory Turn Off the Base NEW Call IndicatorDisplay Screen Messages About Mailboxes Audible IndicatorsAnswering System Operation Set the ClockPress Uuntil you hear Change announcement Record Your AnnouncementFeature Summary Answering System Feature SetupListen to, Save & Delete Messages Adjust Playback VolumePlay Messages Record a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Remote Access CommandsVoice Menu Turn system on End remote access callRecord memo Turn system offBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you lose a call after changing channels If you hear other calls while using your phoneIf you have difficulty hearing messages If messages are incompleteIf CL appears in the Message Window If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clearAnswering System Remote CommandsMachine off press #0again Press