AT&T 1480 user manual Mount the base on the wall, Check for dial tone

Page 9

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 6

INSTALLATION

7Connect the corded handset to the base.

8Connect the telephone line cord to the modular telephone jack.

9Plug the power cord into the electrical outlet.

The ANSWER ON/OFF light goes on, and CL flashes in the Message Window.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111.

10 Mount the base on the wall.

a) Align holes on base with mounting studs on wall jack.

b)Pull base down on mounting studs until it locks into place.

11Check for dial tone.

Lift the handset; you should hear a dial tone.

6

Image 9
Contents Part 1 Important Product Information Draft 2/25/02Advanced American Telephones. All rights reserved Contents About the Base and the Charger Before YOU BeginChoosing the Best Location About Caller ID with Call WaitingAbout Call History Installation Base InstallationTable/Desk Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger InstallationSet the phone for tone or pulse dialing base only Charge the handset batteryHeadset Belt ClipTelephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery SaveDisplay Screen Messages Handset and Base Operating RangeStore a Number/Name in the Directory Telephone DirectoryEdit Dial Erase Edit a Number/Name Stored in the DirectoryDial a Number from the Directory Delete a Number/Name Stored in the DirectoryReview Call History Caller ID OperationDial a Displayed Number Delete Records from Call HistoryDelete a Specific Call Delete All CallsTurn Off the Base NEW Call Indicator Store a Call History Record in the DirectoryDisplay Screen Messages Answering System Operation Audible IndicatorsSet the Clock About MailboxesPress Uuntil you hear Change announcement Record Your AnnouncementFeature Summary Answering System Feature SetupAdjust Playback Volume Listen to, Save & Delete MessagesPlay Messages Call Screening/Intercept Record a MemoMessage Window Display Remote Access Commands Connect with the Answering SystemVoice Menu Record memo End remote access callTurn system off Turn system onBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you lose a call after changing channels If you hear other calls while using your phoneIf messages are incomplete If you have difficulty hearing messagesIf CL appears in the Message Window If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clearAnswering System Remote CommandsMachine off press #0again Press