AT&T 1480 user manual Batteries, Charge the Handset Battery Pack

Page 30

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 27

BATTERIES

Charge the Handset Battery Pack

•This battery should remain charged up to six days with the ringer turned on and up to 10 days with the ringer off. A fully charged battery provides an average talk time of about 10 hours.

•The battery pack needs charging when:

—A new battery is installed in the handset.

—The phone beeps twice every five seconds.

—The screen displays BATTERY LOW and the low battery icon.

•Place the handset in the charging stand so the CHARGING light turns on.

The battery pack is typically fully charged in 12 hours.

•You can keep the battery fully charged by returning the handset to the charging stand after each use.

•If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. Use only Replacement Battery 3301 (SKU# 91076).

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the User’s Manual, Part 1.

27

Image 30

Contents Draft 2/25/02 Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Choosing the Best Location Before YOU BeginAbout the Base and the Charger About Caller ID with Call WaitingAbout Call History Installation Base InstallationTable/Desk Wall Mount Installation Mount the base on the wall Handset Charger Installation Install the handset batteryCharge the handset battery Set the phone for tone or pulse dialing base onlyBelt Clip HeadsetTelephone Operation Telephone Operation Handset Ringer Style/Battery Save Temporary Tone Dialing Base or HandsetOperating Range Display Screen Messages Handset and BaseTelephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Edit Dial EraseDelete a Number/Name Stored in the Directory Dial a Number from the DirectoryCaller ID Operation Review Call HistoryDelete a Specific Call Delete Records from Call HistoryDial a Displayed Number Delete All CallsTurn Off the Base NEW Call Indicator Store a Call History Record in the DirectoryDisplay Screen Messages Set the Clock Audible IndicatorsAnswering System Operation About MailboxesRecord Your Announcement Press Uuntil you hear Change announcementAnswering System Feature Setup Feature SummaryAdjust Playback Volume Listen to, Save & Delete MessagesPlay Messages Call Screening/Intercept Record a MemoMessage Window Display Remote Access Commands Connect with the Answering SystemVoice Menu Turn system off End remote access callRecord memo Turn system onCharge the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you lose a call after changing channelsIf messages are incomplete If you have difficulty hearing messagesIf CL appears in the Message Window If your outgoing announcement isn’t clear If callers cannot leave messages in Mailbox 2 orRemote Commands Answering SystemPress Machine off press #0again