AT&T 1480 user manual Telephone Operation

Page 13

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 10

TELEPHONE OPERATION

AT THE BASE

Base Ringer Volume Switch

Use to adjust how loudly the base rings.

Redial

On steadily:

Press to call the last

handset or base

speakerphone is in use

number dialed at the

Flashing slowly:

base (up to 32 digits).

a call is on hold

Display Dial

Press to dial the number currently displayed on screen.

Hold

Press Hto put a call on hold.

The IN USE light flashes. To return to the call, press K.

NOTE: When Hold is active, pressing P on handset will also return you to the call.

Speaker

Volume

While on a call, use to adjust the volume of what you hear.

Make, Answer, or End a Call

Press K. When calling, use the base keypad to dial or enter a memory location. SPEAKER light is on when call is connected.

Flash

Access subscriber services while on a call.

Page/Intercom

1Press and release to signal someone at the handset. A paging tone sounds.

2When the person at the handset presses I, the handset and base can communicate without tying up the phone line.

3Press again or press oon handset to disconnect.

—OR—

1Dial the number. Use

<to make corrections.

2Press d or K to place the call.

10

Image 13

Contents Part 1 Important Product Information Draft 2/25/02Advanced American Telephones. All rights reserved Contents About the Base and the Charger Before YOU BeginChoosing the Best Location About Caller ID with Call WaitingAbout Call History Base Installation InstallationTable/Desk Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger InstallationSet the phone for tone or pulse dialing base only Charge the handset batteryHeadset Belt ClipTelephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery SaveDisplay Screen Messages Handset and Base Operating RangeStore a Number/Name in the Directory Telephone DirectoryEdit Dial Erase Edit a Number/Name Stored in the DirectoryDial a Number from the Directory Delete a Number/Name Stored in the DirectoryReview Call History Caller ID OperationDial a Displayed Number Delete Records from Call HistoryDelete a Specific Call Delete All CallsStore a Call History Record in the Directory Turn Off the Base NEW Call IndicatorDisplay Screen Messages Answering System Operation Audible IndicatorsSet the Clock About MailboxesPress Uuntil you hear Change announcement Record Your AnnouncementFeature Summary Answering System Feature SetupListen to, Save & Delete Messages Adjust Playback VolumePlay Messages Record a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Remote Access CommandsVoice Menu Record memo End remote access callTurn system off Turn system onBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you lose a call after changing channels If you hear other calls while using your phoneIf you have difficulty hearing messages If messages are incompleteIf CL appears in the Message Window If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clearAnswering System Remote CommandsMachine off press #0again Press