Jabra 81-00491 user manual How to, Battery Indicator

US	6. How to...
ES	Answer a call
	• Tap the answer/end button on your headset to answer a call.
	End a call
PT	• Tap the answer/end button to end an active call.
	Make a call
FR	• When you make a call from your mobile phone, the call will (subject to
	phone settings) automatically transfer to your headset. If your phone does
	not allow this feature, tap on the Jabra BT5020’s answer/end button to
	transfer the call to the headset.
	Reject a call*
	• Press the answer/end button when the phone rings to reject an incoming
	call. Depending on your phone settings, the person who called you will
	either be forwarded to your voice mail or hear a busy signal.
	Activate voice dialling*
	• Press the answer/end button. For best results, record the voice-dialling tag
	through your headset. Please consult your phone’s user manual for more
	information about using this feature.
	Redial last number*
	• Double Tap the answer/end button when the headset is on and not used.
	Adjust sound and volume
	• Press the volume up or down to adjust the volume.
	Mute an ongoing call
	• To mute an ongoing call, press both volume up and down at the same time
	low beep alert plays during a muted call.
	• To un-mute tap either of the volume buttons
	Call waiting and placing a call on hold*
	This lets you put a call on hold during a conversation and answer a waiting call.
	• Press the answer/end button once to put the active call on hold and
	answer the waiting call.
	• Press the answer/end button to switch between the two calls.
	• Tap the answer/end button to end the active conversation.
	* Functions marked with * are dependent on your phone supporting these
	features. Check your phone’s user manual for further information.

7. Battery Indicator

When the Jabra BT5020 is turned on or a button is pressed more than 1 minute after last button press, the LED indicator the battery level of the headset.

2 Green flashes	= 20%	- 100% Charged
2 Yellow flashes	= 10%	- 20% charged
2 Red flashes	= Less than 10% charged



8. What the lights mean		US
		ES
What you see	What is the mean about you
		PT
2 coloured flashes	See Battery indicator (section 7)
Flashing blue and green light	Incoming call	FR
Flashing blue light	Flashing every second: active call
Flashing blue light	Flashing every three seconds: in
	standby mode (only for 1 minute
	then off)
Flashing red light	Running low on battery
Solid green light	Fully charged
Solid red light	Charging
Solid blue light	In pairing mode – see section 4

9. Using the Jabra BT 5020 with 2 mobile phones

Jabra BT5020 is capable of having two mobile phones connected to the headset at the same time. This will give you the freedom of having only headset to operate both your mobile phones and the operation of the functions in the headset functions as described in section 6.

Only it must observed that Last Number Redial will dial the number from the last outgoing call, independent of the mobile phones, and the Voice Dialling function only will work on the last paired mobile phone.

Jabra BT5020 Bluetooth headset