3.From the FLEX PC Partner Configuration dialog box, select the appropriate serial port.
If the port selection is not correct, an error message appears (“No IR devices found”).
4.In the Adapter list box, select the appropriate adapter.
5.Click OK. If this is not the first time FLEX PC Partner has been configured to your PC, click Yes to save your choices and close the FLEX PC Partner Configuration partlet.
Using the PC Partner Shell
The FLEX PC Partner application consists of individual component applications accessible from the FLEX PC Partner Shell, known as partlets. Since each partlet operates independently, they can be used in any order. Except as noted below, you must establish a connection between your pager and your PC in order to open a partlet.
The following partlets are currently available:
∙Address Book (does not require connection to pager)
∙Memory Usage
∙Message Manager (does not require connection to pager)
∙Backup Utility
∙Restore Utility
∙Application Manager
∙Partner Configuration
To open the FLEX PC Partner Shell:
From your desktop, 
FLEX PC Partner.
From the Windows 95 taskbar, click Start, then point to
FLEX PC Partner