Motorola 2000X quick start To recharge the battery outside of the pager

To recharge the battery outside of the pager:

1.Insert the transformer’s round connector into the back of the charger.

Transformer

Two-pronged Plug

Battery

Compartment

Transformer

Round Connector

2.Insert the transformer’s two-pronged plug into any standard 120 Vac power supply outlet.

3.Place the 3.6 V NiMH battery in the charger’s battery compartment by aligning the positive (+) and negative (-) markings on the battery with those on the charger.

4.Press the battery firmly into place. The lit red LED indicator light means that the battery is charging.

￿A flashing red LED indicator means the battery is not making a good contact. Ensure the battery is properly seated in the charger.

5.When the green LED indicator becomes lit, the battery is fully charged. Slide your finger or thumb underneath the battery from the front of the charger and lift the battery out.

TIP Leaving the battery in the charger after the LED turns green keeps the battery fully charged until removed. Keep your spare battery fully charged by leaving it in your plugged-in charger.

6.Remove the round transformer connector from the back of the charger, then remove the two-pronged transformer plug from the power supply.

How Your PageWriter 2000X Works 13