∙Do not charge batteries other than Motorola’s 3.6 V NiMH battery (0186386G01) in the Motorola battery charger (0186388G02). Charging other batteries can cause those batteries to burst or explode, resulting in personal injury or property damage.
Battery Charger Safety
∙Do not expose the charger to rain or snow.
∙Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or injury to persons.
∙Make sure the cord is located where it will not be stepped on, tripped over, pinched, or subjected to damage or stress.
∙If you need to use an extension cord, make sure:
−the pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger;
−the extension cord is properly wired and in good electrical condition; and
−the cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.
∙Do not operate the charger with a damaged cord, transformer block, or prongs; replace them immediately.
∙Do not operate the charger if it has been damaged in any way; take it to a qualified service technician.
∙Do not disassemble the charger; if service or repair is required, call Motorola at
∙Maximum ambient temperature around the power supply must not exceed 40°C (104°F).
∙Keep battery contacts clean. Do not allow dirt or sticky substances to accumulate on the contacts. If you need to clean the contacts, unplug the charger to reduce the risk of electrical shock. Use a slightly dampened cloth to clean the contacts. Let the contacts dry before plugging the charger into an AC outlet. Do not immerse in water.
Agency Approvals
The PageWriter 2000X smart pager has been approved for use by the Federal Communications Commissions (FCC) and