Technical Data, Specifications, CE Certification

Optipay™ CC

A-66 Coin Changer

S e c t i o n 1 0

10 TECHNICAL DATA

This section lists and defines the Optipay™ CC A-66 Coin Changer specifications.

A-66 Specifications

Coin acceptance	20 coin types maximum
	16 different coin channels (up to 3 tokens)
	Coin diameter: 0.59–1.23 in. (15–33 mm)
	Coin thickness: 0.047–0.138 in. (1.2–3.5 mm)
Coin vending:	4 coin types from a tube cassette
	(coin diameter and thickness depends on the specific tube
	cassette)
Device dimensions:	Height: 14.96 in. (380.0 mm)
	Width: 5.25 in. (133.5 mm)
	Depth: 3.01 in (76.5 mm [80 mm with return]) lever depressed])
Machine interface:	Serial Multi-Drop Bus (MDB) interface
Mounting position:	Vertical (maximum deviation = 2°)
Temperature range:	-4 °F to 167 °F (-20 °C to +75 °C)
Humidity:	90% maximum
Nominal voltage:	24 Volts DC
Power consumption:	Standby = 1.2 Watts; maximum 6 Watts with 24 V DC
Noise immunity:	The device fulfills the current requirements on generic immunity
	and generic emissions according to current EC directives (a
	EMC law)
Safety prescriptions:	Low voltage directive

CE Certification

The CE certificate (CE = Communautés Européennes) confirms that our products comply with the specified basic require- ments of the applicable directive. The CE certif-icate is not a quality assurance certificate in terms of the quality expected by the manufacturer, but only in terms of the quality demanded legally. It is a pure administrative certificate and is intended only as proof of compliance with the directives for the monitoring authorities and not directed at clients or final customers.

The following directives and their subsequent changes can be applied partially to JCM devices:

1.The EMC Directive (89/336/EEC) regarding devices that cause electromagnetic interfer- ence or are interfered with by same.

2.The Low Voltage Directive (73/23/EEC) regarding electrical equipment used with a nominal voltage between 50 and 1000 Volts AC and 75-1500 Volts DC.

The CE Certificate Labelling Directive (93/68/ EEC) modification regarding the application and use of CE labels.

1 0 - 1