C. Crane A-66 manual Display Meaning Trouble

Appendix A Optipay™CC TROUBLE SHOOTING

Table A-2 Display Indicators (Continued)

Display	Meaning	Trouble
Ab-06	Sensor behind	Check acceptance
	the acceptance	gate with WinEMP® or
	gate has not	PalmEMP® and if
	recognized the	necessary, exchange it
	inserted coin	(Service case) or check
		the CP3 sensor
		(Service case)
Ab-07	Sensor behind	Check acceptance
	the acceptance	gate with WinEMP® or
	gate has not	PalmEMP® and if
	recognized	necessary, exchange it
	inserted coin
		(Service case) or
		Check the CP4 sensor
		(Service case)
Ab-08	Inserted coin	Insert coin more
	has covered	slowly, or Inserted coin
	the sorting con-	not on string or check
	trol for too long	the CP4 sensor
	a time	(Service case)
Ab-09	String manipu-	Inserted coin not on
	lation recog-	string or if necessary,
	nized	reduce sensitivity of the
		String Sensor using
		PRO 21 01 or clean
		and/or exchange
		String Sensor (Service
		case), or check accep-
		tance gate for ease of
		movement (Service
		case)
Ab-10	Inserted coin	No error
	recognized in
	false money
	coin channel
Ab-11	Inserted coin	No error
	recognized as
	enabling token
Ab-12	Inserted coin	Check Vending
	inhibited from	Machine’s settings
	the Vending	(is possible that high
	Machine	value coins were
		inhibited because tubes
		are empty)
Ab-00	Other fault with	Service case
	coin accep-
	tance
FE	Coins jammed	Remove the cassette
FE-01
	in the payout	and jammed coins,
	area (left tube)	then vend one coin
		from this tube using the
		“L” inventory key, or a
		Service case

Table A-2 Display Indicators (Continued)

Display	Meaning	Trouble
FE-02	Coin jammed in	Remove the cassette
	the payout area	and jammed coin,
	(middle left	then vend one coin
	tube) or	from this tube using the
	motor failure of	“ML” inventory key, or a
	middle left tube	Service case
FE-03	Coin jammed in	Remove the cassette
	the payout area	and jammed coin,
	(middle right	then pay out one coin
	tube) or	from this tube using the
	motor failure	“MR” inventory key, or
	(middle	a Service case
	right tube)
FE-04	Coin jammed in	Remove the cassette
	the payout area	and jammed coin, then
	(right tube) or	pay out one coin from
	motor failure	this tube using the “R”
	(right tube)	inventory key or a
		Service case
FE-13	Checksum fault	Check and, if
	by acceptance	necessary, adjust the
	band	acceptance band of the
		appropriate coin
		channel with WinEMP©
		or PalmEMP©
FE-14	Checksum fault	Check and, if neces-
	by coin values	sary, correct coin
		values with WinEMP©
		or PalmEMP©
FE-15	Checksum fault	Check PRO functions
	by configura-	with the Palm Setting
	tion	Module and, if neces-
		sary, correct them
FE-38	Vending	Check Vending
	Machine no	Machine control or the
	longer commu-	interconnecting cable
	nicates with
	Coin Changer
	(has sent no
	command in 2
	seconds.)

5900335 © 2005 JCM-American Corporation

A - 3