Service Tools, Advantages, PC Test Station

Section 1

Optipay™CC

GENERAL INFORMATION

At the beginning of each section you will find a "Chapter Guide", that summarizes the content of the specific section.

Separate software instructions to configure the Coin Changer are located in "Configuration" sec- tion 11.

•WinEMP© – Contains the configuration and diagnostics programs for the JCM Coin Validators, and the operating instructions for the Optipay™ CC A-66 Coin Changer.

•PalmA66© – Contains the operating instructions for configuring the Optipay™ CC A-66 Coin Changer

•PalmEMP© – Contains the operating instructions for configuring the A-66 Coin Validator.

If these instructions are not available to you, they can be downloaded at any time from the JCM home page (www.jcm-ameri- can.com) in a compressed Portable Docu- ment File (PDF) format.

General Information Concerning Coin Changer

The four tube Optipay™ CC A-66 Coin Changer series is designed for vending and service machines containing the serial Multi Drop Bus (MDB) interface.

The integrated Coin Validator contains the reliable sensor system and false money rejection capabili- ties of the tried and tested G-40.4000 Coin Valida- tor within the G-46.4 Coin Changer series.

In order to react as quickly as possible to newly inserted false coins and to enable your individual adjustments, the Coin Validator can be connected to a Personal Computer (PC) programming station

containing the WinEMP© configuration and diag- nostics software, including a card reader, chip card and the G-19.0641 test assembly. With the aid of a

Palm Pilot® handheld containing PalmEMP©, and

PalmA66© program applications, the Coin Changer can be configured directly at the vending machine independently from the PC method. This manual deals exclusively with the Coin Changer

configuration using the Palm Pilot®. For configura- tions using the other programs, separate software instructions are available. (see the "Service tools" section in this section and Chapter 11 "Configura- tion" for further information).

Token types not programmed by the manufacturer, can be programmed directly at the Coin Changer by inserting the new tokens.

Advantages

•An easily configured Coin Validator enables fast reaction to changing market situations and new false coin introductions

•Easy configuration with help from:

–the WinEMP© PC software for the workshop

–the PalmA66© or PalmEMP© with Palm Pilot® handheld software

•Reliable sensing system and optimum rejection of false coins due to the integrated, electronic A-66 Coin Validator

•Universal payout mechanism for different coin diameters and thicknesses

•Flexible payout combinations by easy tube cassettes change out

•Faster service due to error diagnosis

•Splash-proof electronics

•A monitored coin run and controlled sorting guarantee an improved operating reliability and protection against manipulation

•An acceptance speed of 2 coins per second

•A teach mode, able to learn up to three different tokens types or sizes

•Flash Memory technology for implementing uncomplicated and time-saving Coin Validator operating software updates

Service Tools

In order to test the Coin Changer and adapt it to the individual needs of your facility, the following accessories can be acquired from JCM:

PC Test Station

If you only wish to check the functionality of the Coin Changer without making any adjustments, the JCM Test Station is sufficient for this purpose. The Test Station is composed of the following two components:

•Tester G-19.0654 for use as Vending Machine simulation and MDB functional testing.

1 - 2