C. Crane A-66 manual Gramming within the menu

PALM PILOT® USAGE Optipay™CC Section12

a). Select the Service tab on the main menu screen (See Figure 12-14 a), and then

b). Select Payout set on the menu that appears to view the coin levels in each tube (See Figure 12-14 b). Click on the

related tube position tab to perform a payout test on the respective tube (See Figure 12-14 c).

c). To edit the counter, click Edit counter (See Figure 12-14 d) and

d). Adjust levels using the respective “up” and “down” pointing triangular arrow (See Figure 12-14 e).

l). Click to program the Coin Changer (See Figure 12-14 f).

2. Viewing the “Filling Levels”.

a). Select the Service tab on the main menu screen (See Figure 12-15 a); then

b

a

Figure 12-15Filling Levels Mode

b). Select	to view the coin
level bargraphs, count, each tube’s total
coin value and the entire Tube Cassette’s
total monitory value.
2. Teaching new coins & tokens.
a). Select Teach token	on the

menu screen (See Figure 12-16 a -b), then

b). Select the desired channel to program the chosen token (See Figure 12-16 c).

c). From the screen select a new token to program (i.e., Teach ) or one to change that has already been programmed into the Coin Changer memory (i.e.,

).

ab

c

Figure 12-16Teach Tokens Mode

d). While in the “Teach Token” mode insert a minimum of 10 coins to program tokens into the Coin Changer’s memory

(See Figure 12-17 d).

d

e

f

h

g

Figure 12-17Token Programming Mode

e). Select Continue on the

menu screen within the menu revealing a third

menu (See Figure 12-17 e).

f). Select either Normal or Wide accep- tance parameters (See Figure 12-17 f); then

g). Select OK in the menu that appears (See Figure 12-17 g).

c). Select the appropriate func- tion tab (e.g., Vend token , Reject token or Value token ) to complete token pro-

gramming within the menu.

5900335 © 2005 JCM-American Corporation

1 2 - 5