Optipay™ CC
A-66 Coin Changer
S e c t i o n 2
2 SAFETY INSTRUCTIONS
This section providessafety instructions for using the Optipay™ CC
Before operating the device for the first time, please carefully read through this manual at least once, and most importantly, read the safety instruc- tions. This ensures that the contents of this manual and the operation of the
Proper use
The four tube
The Coin Changer series is state of the art and has been constructed in compliance with recognized safety regulations. Nevertheless, this equipment can be a source of danger. Therefore, please observe the following safety regulations:
Protecting Yourself and the Equip- ment
The
Only use the Coin Changer according to for it’s intended use. Under no circumstances can the manufacturer be held liable for any damage or loss resulting from improper use of this device.
The Coin Validator‘s printed circuit board (pcb) is fitted with electronic components which may be damaged beyond repair by electrostatic discharge.
Please observe the handling instructions regarding static sensitive components.
Select the correct operating voltage for the Coin Changer (see device label directly, or Figure
Remove the Vending Machine’s Power Line Plug before you install, clean or remove the Coin Changer.
Always transport the Coin Changer empty of coins and in its original packaging. It is sufficiently protected in this way. Never carry the Coin Changer by its external cables.
Contact JCM if you wish to alter the Coin Changer’s design greater than that which is described in these instructions.
Keep water and other liquids away from the Coin Changer.
Dispose of a damaged Coin Changer correctly, if you have no further use for it.
JCM reserves the right to make technical modifications to the device which are not covered by these instructions.
5900335 © 2005
2 - 1