C. Crane A-66 manual Changer Service, Token Programming, and Currency Conversion

Section 12 Optipay™CC PALM PILOT® USAGE

a

Figure 12-11 Recycler Mode

12. The “Other settings” configurations.

a). Select the Other settings… mode on the menu screen and the following

selections will appear:

•Smallest coin value: – Reference value for all coin values programmed. All coin values to be accepted must be a multiple of the smallest coin value

(See Figure 12-12).

Select the desired options and click

to program the Changer.

Figure 12-12Other Settings Mode

•Telephone code: – and

Currency code: – These codes are used in combination to set the Vending Machine’s language and currency type.

NOTE: The Telephone Code is initially set to “01” and the Currency Code is initially set to “9001”.

•MDB feature level: –

–Level 3 – The changer controls all payout functions

–Level 2 – The vending VMC controls all payout functions

•Wake up time: – External input enable signal for use with battery powered units.

•String sensitivity: – “0” is the minimum sensitivity level setting. “49” is the maximum sensitivity level setting.

b). Make value changes by using the related Up/Down menu triangular arrows to set

the desired value and select .

11. Cloning configuration settings.

	a). Click on the				menu bar and select
				(See Figure 12-13 a).
		Clone setting data
a							c
			b			d

Figure 12-13 Clone Mode

b). To record the Coin Changer’s settings,

select from the

menu that appears, then select the desired record number (See Figure 12-13

b-to-c) in the menu that appears.

c). To program the settings into a new Coin

Changer, select (See Figure 12-13

c) or to reset to Step “b” and

d). Select the appropriate or button (See Figure 12-13 d).

Changer Service, Token Programming, and Currency Conversion

1.Changer payout set & tube counter editing.

b

a

c

e

f d

Figure 12-14 Service Mode

5900335 © 2005 JCM-American Corporation

1 2 - 4